New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
as long as the IP's are available on the network, you just add them in the solusvm control panel and they will work.
Make sure you are putting in the correct gateway and netmask when adding the ip's into solusvm
You'll need to create a KVM bridge on host node. If you haven't made that then do that, if you have made that but it's still not working then put the contents of eth & br network configuration files.
Please don't mis-guide someone if you don't know.
This is what you need: https://documentation.solusvm.com/plugins/servlet/mobile#content/view/557703
I would put my own configurations here for example but I'm on mobile at the moment.
I can help you for free if you can provide server details , they can be sent us on ticket @ [email protected] , later password can be changed
Thanks for your reply, hopefully when you can leave your settings for example
Thank you, send an email
Here you go:
[root@kvm network-scripts]# cat ifcfg-eth0
DEVICE="eth0"
HWADDR=MAC ADDRESS OF YOUR ETHCARD
ONBOOT="yes"
TYPE=Ethernet
IPV6INIT=no
USERCTL=no
BRIDGE=br0
[root@kvm network-scripts]# cat ifcfg-br0
DEVICE=br0
TYPE=Bridge
BOOTPROTO=static
DNS1=8.8.8.8
IPADDR=108.17x.xxx.xx4
NETMASK=255.255.255.248
GATEWAY=108.17x.xxx.xx3
ONBOOT=yes
Modify MAC Address & IP configuration as per your needs then "service network restart" & then simply add IPs on SolusVM GUI.
We fixed it for him long ago
Thank you very much for your help
Thanks for the info