New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Does anyone knows how to use /48 ipv6 subnet from anynode.net?
serveradministrator
Member
in Help
I got a new VPS from anynode.net and they gave me a /48 ipv6 block. This is what my interfaces looks like on Debian
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The normal eth0
allow-hotplug eth0
iface eth0 inet dhcp
# Additional interfaces, just in case we're using
# multiple networks
allow-hotplug eth1
iface eth1 inet dhcp
allow-hotplug eth2
iface eth2 inet dhcp
# Set this one last, so that cloud-init or user can
# override defaults.
source /etc/network/interfaces.d/*
This is something new to me as I always generated IPv6 in control panel for years. Is there any user who can share the config file with me so that I can use the subnet. There are no IPv4 or IPv6 listed or any gateway information. IPv6 is not working right now. Also I would like to use Wireguard later on, it would be nice to get some information on how to get a subnet for Wireguard
Comments
/etc/netplan/netplan.yaml
Thanks, how can I make couple of /64 subnets to use from 2605:1111:1111::/48
oh sorry, you are on debian with legacy style etc/network/interfaces
you can probably add something like
post-up ip -6 a 2605:111::/48 dev eth0
you don't need to make, just end in /48
Yes I use Debian 10
/etc/network/interfaces for an address from a /48 block. Check the CP (e.g. SolusCP) for what values to insert.
For WireGuard with IPv6 addresses allocated from the block, you need to check if your provider offers routed ipv6 addresses (you are in luck) or just on-link ipv6.
Hello,
Do you have a ticket open? I am guessing you do I shall handle today
I also having issue to setup the ipv6
Anyone successfully setup via netplan? thanks in advance
hey @derekyang feel free to hop in our discord or open a ticket but use a netmask of /32 any further issues please reach out to me directly