New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
An excellent tutorial is available in the official docs so there is no need to duplicate their work. I guess a cheaper option would be to pay someone to setup everything for you without spending extra time on creating a tutorial that already exists.
Well i am stuck with setting up open nebula with additional ip blocks and i could configure it with a single ip block of /29 without any issue with windows contextualization but i cannot really understand how to do that when there is a /29 block and a additional /28 block i used to bridge the enp4s0f0 to br0 to configure when there is only a /29 block
I spend 3 days browsing forums and googling
But no luck with that
thats why I am willing to spend if someone can teach me that thing
Screw the bridged networking, go with routed one and 2 separate virtual networks (one for /28 and one for /29).
is that impossible to do it with bridged networking
What hosting provider do you use with your dedi? If it is OVH, bridged networking just won't work with OpenNebula due to their vMac thingy.
i am using wholesaleinternet
i am using wholesaleinternet
Well ask them if the /28 is on vlan. If is not you need to run a routed bridge config
Yes the /28 is on the VLAN
I am not knowledgable about opennebula, but can't you simply add a second bridge for the /28 ? that's what I would do in proxmox at least if I wouldn't want to use a routed setup...
will try that
@exception0x876, ovh:: it is working fine with their mac, you need to assign the mac and the ips in opennebula, i did this and it was working just fine.