New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Broken pipe error installing a template
Just try with sudo -i and curl but nothing.
Grml - Linux for geeks
root@grml ~ # wget -O- 'http://mirror.joodle.nl/WS2008R2Datacenter-Joodle-Template.gz' | gunzip | dd of=/dev/sda
--2017-01-10 15:46:16-- http://mirror.joodle.nl/WS2008R2Datacenter-Joodle-Template.gz
Resolving mirror.joodle.nl (mirror.joodle.nl)... 104.200.142.42
Connecting to mirror.joodle.nl (mirror.joodle.nl)|104.200.142.42|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3258899094 (3,0G) [application/octet-stream]
Saving to: ‘STDOUT’
- 0%[ ] 8,17M 5,79MB/s dd: writing to ‘/dev/sda’: Input/output error
- 0%[ ] 8,37M 5,87MB/s in 1,4s
Cannot write to ‘-’ (Broken pipe).
49569+0 records in
49568+0 records out
25378816 bytes (25 MB) copied, 2,24874 s, 11,3 MB/s
Comments
I am no expert, but looks like you are overwriting your primary disk, and hence lost the current installation, Which might have led to disconnection
Were you able to login to VPS after this, without needing to reinstall OS?
Thanks for your help , i have 2 disk sda1 with 400mb , its the boot disk and /dev/sda2 with 20gb
i also do
wget -O- 'http://mirror.joodle.nl/WS2008R2Datacenter-Joodle-Template.gz' | gunzip | dd of=/dev/sda2
same error.
server its in rescue mode and login by ssh
Who's rescue mode are you using?
root
Grml , from myLoc
At the moment the server is in rescue mode, limited administration is possible.
Type in lsblk in the terminal and paste the output here
root@grml ~ # lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 29,8G 0 disk
├─sda1 8:1 0 500M 0 part
└─sda2 8:2 0 14,5G 0 part
loop0 7:0 0 420,2M 1 loop /lib/live/mount/rootfs/grml64-full_testing.squa
@raikkosl Copy and paste this command below
If this still fails then the template is actually trying to take up more hard drive space than you have, your servers disk is 30GB and I'm not sure what @joodle set the size to be
This may be possible, however I am betting you need to use sudo.
sudo -I
Then run your wget command.
Otherwise, if it is a size issue the templates on www.whatuptime.com are made with a 15GB drive so they will fit.
Yeah, sadly the ones I made for my OVH VPS tutorial don't have RDP set up as they assume you can access KVM
Done and re done with whatuptime template and same error. Im stuck realy XD , if anyone wanna try it i ll give the ip and username in pm ,
Please provide a link to the exact service you purchased.
Product: SD-X2150
Debian Plesk (64bit plain)
Additional options: 1.000 MBit-Anbindung
Prozessor: AMD Opteron X2150
Leistung: 4 x 1,5 GHz
Arbeitsspeicher: 8 GB DDR3
HDDs:
Slot 1: 32 GB SSD
Slot 2: 1.000 GB
Servdiscount, a myloc bidding service
Myloc rescue system is not supported and is not working. Wget is just crapped out on their rescue system.
That's strange, I wonder if a workaround would be possible
Crap for me T.T xD.
Anyways i contact with myLoc and get this:
i answer if can do by wget command and get this
Well you could try that, but as the server is not compatible with Windows, I think it won't work.
Anyways i need a windows server, apache for me is useless , and im noob for this. but if a pro wanna try f*** myloc installing windows, pm i ll give you the server data (is payed 1 month)