New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
What was the issue with the Windows VM?
Could you not connect externally to anything, I can see both RX & TX counters shows traffic passing, so I would guess it is a difference in the network card setup on Promox side.
Try configuring the .20 address on the Windows VM?
Windowns no access internet ,
You shouldn't have the IP address configured on the host node, only in the VPS.
I can SSH to 23.229.5.21, which means the host node is using the IP and not the windows VPS.
I have test with 20 .19 but unsuccessfully for windows. Conversely when I configured the server centos success.
@linuxthefish : I testto change to .20 centos. It works well, whereas I failed to .19 in Windows machine
use template for windows ? Try install via ISO and use DNS google 8.8.8.8/8.8.4.4
You don't configure the ips on proxmox itself. You simply add them on the vm itself. The vm bridge takes care of the rest.
@vpsdedicated : Win 2k8 . i have use DNS google , but not work
Have you tried the following configuration?
Remove ALL the networking configuration from eth0 on proxmox.
Create a network bridge on Proxmox, and bridge it with eth0.
Configure the bridge to use the IP 23.229.5.18, the subnet mask 255.255.255.248, and the gateway 23.229.5.17.
Reboot to apply the updates (Proxmox will ask you to).
After reboot, create a new VM. When it asks for the network adaptor, select "vmbr0".
After installing the Windows VM, use the next IP (23.229.5.19) in the network configuration along with the subnet mask and the gateway.
hmm, tested all IPs, ssh okay
Problem solved. Thanks all friend
I don't see the problem posted in the original post. That could be useful to those who read threads in order to learn things.
How was the problem solved? This thread has turned into a waste of space for the next person to come along
@Ole_Juul : I have edit my post
Yes, of course I see that. That is why I'm complaining. (duh!) So how are to know what it said before?