All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
ipv6 is not pinging after installing solusvm
Hey guys i have a server at online.net and i recently configured it with dibbler in order to make my ipv6 work.
So it did work and i was able to ping6 on google and i did receive and transmitted packets without loosing.
But after that i installed solusvm and restarted my network and when i ping6 it says " Network is unreachable"
any ideas? do i have to configure firewalls after installing solusvm if so how can i do that?
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="static"
DNS1="62.210.16.6"
GATEWAY="195.154.7.1"
HOSTNAME="handyDedi"
HWADDR="E8:9A:8F:50:8A:75"
IPADDR="195.154.7.142"
IPV6INIT="yes"
MTU="1500"
NETMASK="255.255.255.0"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="594b6247-8976-4a04-a4e3-66194864b02c"
IPV6ADDR="2001:bc8:2095:2f01::2/64"
/etc/sysctl.conf
net.ipv4.ip_forward = 1
net.ipv4.ip_forward = 1
net.ipv6.conf.default.forwarding = 1
net.ipv6.conf.all.forwarding = 1
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.all.rp_filter = 1
kernel.sysrq = 1
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0
any idea what is the problem is? this is the message that comes when i restarts the network.
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: Determining if ip address 195.154.7.142 is already in use for device eth0...
Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel
Please restart network with '/sbin/service network restart'
[ OK ]
Bringing up interface venet0: can't find venet kernel module
[FAILED]
Comments
venet0 is down, no idea why and ipv4/ipv6 hasn't been properly configured
ip -6 r output please and check /etc/sysconfig/ip6tables for icmp deny/drop rules.
These are my ip6tables
ip -6 r output:
whats the issue ?
delete the 2 lines with reject-with icmp6-adm-prohibited in them and restart ip6tables.
still not working
Do you have customer data on there yet, happy to login and fix it for you if you want?
Oh man thank you very much!