Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


Rootserver VS2-free from euserv.com
New on LowEndTalk? Please Register and read our Community Rules.

Rootserver VS2-free from euserv.com

Info from euserv.com

The root server model "VS2-free" is based on the new container-based vServer platform from EUserv and offers hosting in a virtualized Linux environment with full root rights and all associated advantages of your own server.
The model "VS2-free" can be used free of charge in the basic version with IPv6 and is ideal for testing, as a development environment or as the basis for creating larger and growing systems.

https://www.euserv.com/en/virtual-private-server/root-vserver/v2/vs2-free.php?pk_campaign=NL-DE

good luck in testing your server :)

«1

Comments

  • manlivomanlivo Member without signature

    Thank for sharing!

  • I guess it was posted earlier as well
    Anyway at that time when i rebooted server it was stuck in processing status in thuer control panel still in same status today. so i wouldn't waste time fiddling around better get NAT with port forwarded or mini vps

    If you want access to a system all you have to do is ask - Kevin Mitnick

  • good share.

  • nice post :wink:

    don't forget to hit Thanks

  • Here`s a Bench

    System Info

    Processor : Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
    CPU Cores : 1
    Frequency : 1889.025 MHz
    Memory : 976 MB
    Swap : 976 MB
    Uptime : 42 min,

    OS : Debian GNU/Linux 9 (stretch)
    Arch : x86_64 (64 Bit)
    Kernel : 4.20.8-1.el7.elrepo.x86_64
    Hostname :

    Speedtest (IPv6 only)

    Your public IPv6 is

    Location Provider Speed
    Atlanta, GA, US QuadraNET 8,45MB/s
    Dallas, TX, US Linode 4,20MB/s
    Newark, NJ, US Linode 25,0MB/s
    Fremont, CA, US Linode 3,90MB/s
    Chicago, IL, US Steadfast 8,03MB/s
    Tokyo, Japan Linode 3,06MB/s
    Singapore Linode 10,3MB/s

    Frankfurt, Germany Linode 80,9MB/s
    London, UK Linode 67,1MB/s
    Haarlem, Netherlands Leaseweb 75,3MB/s

    Disk Speed

    I/O (1st run) : 133 MB/s
    I/O (2nd run) : 119 MB/s
    I/O (3rd run) : 9 MB/s
    Average I/O : 87 MB/s or .08 GB/s

    Thanked by 1Ganonk
  • only one month free

    don't forget to hit Thanks

  • Thank you they activated me after 3 hours, everything is already up and running .

    I wonder if there's a time limit for these machines.

  • @Ganonk said:
    only one month free

    Or a monthly billing cycle of $0..

    Thanked by 1Ganonk
  • edoarudo5edoarudo5 Member
    edited February 2020

    Thank you for sharing this. Free is always good. :)

  • GanonkGanonk Member
    edited February 2020

    anyone can help me, How to access shell ipv6 to login?

    becauce at my country only ipv4

    don't forget to hit Thanks

  • @Ganonk said:
    anyone can help me, How to access shell ipv6 to login?

    becauce at my country only ipv4

    You need a jump host which has both IPv4 connection and IPv6 connection.
    Recommend Vultr and DO, they charge hourly.

    Or use the Free IPv6 Tunnel provided by HE
    https://tunnelbroker.net/

    Thanked by 1Ganonk

    Idling Spammer

  • farsighterfarsighter Member
    edited February 2020

    @Ganonk said:
    anyone can help me, How to access shell ipv6 to login?

    becauce at my country only ipv4

    Easiest way would be to install the package 'miredo' on ANOTHER Linux VPS (or a VM on your PC ) then connect from there.

    #apt-get install miredo
    It should start working automatically after installation. no configuration needed.

    You can control it using:
    #service miredo start/stop/restart
    (Or equivalent on Centos)

    Miredo uses Teredo tunneling Google it for more info

  • @RecD said:

    @Ganonk said:
    anyone can help me, How to access shell ipv6 to login?

    becauce at my country only ipv4

    You need a jump host which has both IPv4 connection and IPv6 connection.
    Recommend Vultr and DO, they charge hourly.

    Or use the Free IPv6 Tunnel provided by HE
    https://tunnelbroker.net/

    OK thanks you,, my problem has been solved

    don't forget to hit Thanks

  • GanonkGanonk Member
    edited February 2020

    @farsighter said:

    @Ganonk said:
    anyone can help me, How to access shell ipv6 to login?

    becauce at my country only ipv4

    Easiest way would be to install the package 'miredo' on ANOTHER Linux VPS (or a VM on your PC ) then connect from there.

    #apt-get install miredo
    It should start working automatically after installation. no configuration needed.

    You can control it using:
    #service miredo start/stop/restart
    (Or equivalent on Centos)

    Miredo uses Teredo tunneling Google it for more info

    OK thanks for your attentions..

    i'm using command ssh [email protected]

    don't forget to hit Thanks

  • Socks proxy should work just fine.

    Thanked by 1Ganonk

    So Say We All

    [Yer lame ad could have been here]

  • snapper100snapper100 Member
    edited February 2020

    Windows have teredo (miredo on windows) tunneling as builtin since winxp

    Teredo can be enabled with:
    netsh interface ipv6 set teredo default (Source: https://de.wikipedia.org/wiki/Teredo#Microsoft_Windows)

    After this you can use putty to access your virtual server.
    The fastest way is to use the full server name
    srv[yourid].blue.kundencontroller.de

    Source:
    https://en.wikipedia.org/wiki/Teredo_tunneling
    https://de.wikipedia.org/wiki/Teredo#Microsoft_Windows

    Thanked by 1Ganonk
  • vServer-News: IPv4 address for free server "VS2-free"

    From now on, all users of the free server "VS2-free" can optionally add an
    IPv4 address to the server. In addition to the IPv6 address included as
    standard, the server can be upgraded to full dual-stack operation and is
    therefore also accessible to participants who still use the old IPv4
    address space.

    Here you can find all information about the server "VS2-Free":
    http://go.euserv.org/WK

    You can select the IPv4 address at any time in the customer center ->
    contract -> book IPv4 addresses and then configure it on your server.

  • @qmesso said:
    vServer-News: IPv4 address for free server "VS2-free"

    Despite the frequency of the word 'free', the IPv4 addresses still seem to be €1.01 in the spec., and unspecified 'costs' are mentioned when you try to add one, so I haven't.

  • I have order a IPv4. It cost 2 EUR onetime and 1 EUR per month in my case. I think this is more than ok for a root vps.

  • RecDRecD Member

    Dedicated IPv4 is over my budget.
    Hope to add IPv4 NAT support... (with lower cost or FREE! :wink: )

    Idling Spammer

  • @RecD said:
    Dedicated IPv4 is over my budget.
    Hope to add IPv4 NAT support... (with lower cost or FREE! :wink: )

    ^^ realy george :smile: . 1 EUR thats one burger on mcd ...

  • @Ganonk said:

    @farsighter said:

    @Ganonk said:
    anyone can help me, How to access shell ipv6 to login?

    becauce at my country only ipv4

    Easiest way would be to install the package 'miredo' on ANOTHER Linux VPS (or a VM on your PC ) then connect from there.

    #apt-get install miredo
    It should start working automatically after installation. no configuration needed.

    You can control it using:
    #service miredo start/stop/restart
    (Or equivalent on Centos)

    Miredo uses Teredo tunneling Google it for more info

    OK thanks for your attentions..

    i'm using command ssh [email protected]

    Really helpful.Thank you!

    Thanked by 1Ganonk
  • @snapper100 said:

    ^^ realy george :smile: . 1 EUR thats one burger on mcd ...

    Yes True

    don't forget to hit Thanks

  • GanonkGanonk Member
    edited March 2020

    @snapper100 said:
    I have order a IPv4. It cost 2 EUR onetime and 1 EUR per month in my case. I think this is more than ok for a root vps.

    Hello,

    do you can to test benchmark thats free server?

    thanks you

    don't forget to hit Thanks

  • `----------------------------------------------------------------------
    CPU model : Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz
    Number of cores : 1
    CPU frequency : 3759.348 MHz
    Total size of Disk : 9.8 GB (0.8 GB Used)
    Total amount of Mem : 976 MB (50 MB Used)
    Total amount of Swap : 976 MB (0 MB Used)
    System uptime : 0 days, 0 hour 7 min
    Load average : 9.11, 8.96, 8.54
    OS : Debian GNU/Linux 10
    Arch : x86_64 (64 Bit)

    Kernel : 4.20.8-1.el7.elrepo.x86_64

    I/O speed(1st run) : 118 MB/s
    I/O speed(2nd run) : 125 MB/s
    I/O speed(3rd run) : 78.9 MB/s

    Average I/O speed : 107.3 MB/s

    Node Name IPv4 address Download Speed
    CacheFly 205.234.175.175 75.6MB/s
    Linode, Tokyo2, JP 139.162.65.37 2.54MB/s
    Linode, Singapore, SG 139.162.23.4 14.0KB/s
    Linode, London, UK 176.58.107.39 13.8MB/s
    Linode, Frankfurt, DE 139.162.130.8 32.7MB/s
    Linode, Fremont, CA 50.116.14.9 2.32MB/s
    Softlayer, Dallas, TX 173.192.68.18 8.40MB/s
    Softlayer, Seattle, WA 67.228.112.250 4.02MB/s
    Softlayer, Frankfurt, DE 159.122.69.4 66.7MB/s
    Softlayer, Singapore, SG 119.81.28.170 2.94MB/s
    Softlayer, HongKong, CN 119.81.130.170 2.14MB/s
    ----------------------------------------------------------------------`

    Thanked by 1Ganonk
  • `# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

    Yet-Another-Bench-Script

    v2020-02-10

    https://github.com/masonr/yet-another-bench-script

    ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

    Fri 13 Mar 2020 07:00:14 AM CET

    Basic System Information:

    Processor : Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz
    CPU cores : 1 @ 3740.670 MHz
    AES-NI : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM : 976Mi
    Swap : 976Mi
    Disk : 9.8G

    fio Disk Speed Tests (Mixed R/W 50/50):

    Block Size 4kb (IOPS) 64kb (IOPS)
    Read 12.84 MB/s (3.2k) 1.55 GB/s (24.2k)
    Write 12.84 MB/s (3.2k) 1.56 GB/s (24.4k)
    Total 25.69 MB/s (6.4k) 3.11 GB/s (48.7k)
    Block Size 512kb (IOPS) 1mb (IOPS)
    ------ ----- ---- --- ----
    Read 1.80 GB/s (3.5k) 1.88 GB/s (1.8k)
    Write 1.90 GB/s (3.7k) 2.00 GB/s (1.9k)
    Total 3.71 GB/s (7.2k) 3.88 GB/s (3.7k)

    iperf3 Network Speed Tests (IPv4):

    Provider | Location (Link) | Send Speed | Recv Speed
    | | |
    Bouygues Telecom | Paris, FR (10G) | 241 Mbits/sec | 444 Mbits/sec
    Online.net | Paris, FR (10G) | 379 Mbits/sec | 197 Mbits/sec
    WorldStream | The Netherlands (10G) | 204 Mbits/sec | 524 Mbits/sec
    wilhelm.tel | Hamburg, DE (10G) | 431 Mbits/sec | 205 Mbits/sec
    Biznet | Bogor, Indonesia (1G) | 555 Mbits/sec | 45.5 Mbits/sec
    Hostkey | Moscow, RU (1G) | 412 Mbits/sec | 830 Mbits/sec
    Velocity Online | Tallahassee, FL, US (10G) | 469 Mbits/sec | 99.3 Mbits/sec
    Airstream Communications | Eau Claire, WI, US (10G) | 624 Mbits/sec | 133 Mbits/sec
    Hurricane Electric | Fremont, CA, US (10G) | 613 Mbits/sec | 149 Mbits/sec

    iperf3 Network Speed Tests (IPv6):

    Provider | Location (Link) | Send Speed | Recv Speed
    | | |
    Bouygues Telecom | Paris, FR (10G) | 683 Mbits/sec | 580 Mbits/sec
    Online.net | Paris, FR (10G) | 462 Mbits/sec | 610 Mbits/sec
    WorldStream | The Netherlands (10G) | 743 Mbits/sec | 500 Mbits/sec
    wilhelm.tel | Hamburg, DE (10G) | 671 Mbits/sec | 535 Mbits/sec
    Airstream Communications | Eau Claire, WI, US (10G) | 467 Mbits/sec | 245 Mbits/sec
    Hurricane Electric | Fremont, CA, US (10G) | 431 Mbits/sec | 122 Mbits/sec

    Geekbench 5 test failed. Run manually to determine cause.

    `
    Additional information
    In this free vps you can add ftp quota
    10,000 MB, plus an IPv4-Address fee of 1 euro, this is an interesting proposal, just install rclone and get to work :)

    Thanked by 1Ganonk
  • thanks you

    don't forget to hit Thanks

  • Problems with vServer VS2-free from euserv.com

    I have tried very hard on this one month free VPS, making me mad.

    Either it is completely unable to login to the ssh shell, or it is unable to issue your commands once logged in, if you're lucky enough. The screen appears so slow that make my working on the command window impossible.

    In the browser interface, the same problem occurs. The pages load very slowly, and strange enough, after I have changed the default ssh login pass, I still have to use the old password to login into the webconsole.

    If you want to do something serious, such as running a decent website or some coding, forget it! I don't know how its paid VPS can be like. If the free version is so terrible, their paid plans can be no better.

  • @globalone said:
    Problems with vServer VS2-free from euserv.com

    I have tried very hard on this one month free VPS, making me mad.

    Either it is completely unable to login to the ssh shell, or it is unable to issue your commands once logged in, if you're lucky enough. The screen appears so slow that make my working on the command window impossible.

    In the browser interface, the same problem occurs. The pages load very slowly, and strange enough, after I have changed the default ssh login pass, I still have to use the old password to login into the webconsole.

    If you want to do something serious, such as running a decent website or some coding, forget it! I don't know how its paid VPS can be like. If the free version is so terrible, their paid plans can be no better.

    Yeah, I can confirm that. Their nodes are overloaded as much. If you want to install for example apache2 it would take around 15 minutes to get it installed. I also order a IPv4 before testing VPS but I think I will just let it to expire as using this VPS is useless.
    I know its free but looks like they do not monitor any activity on their free nodes.

  • Yeah, its free, and slow as hell.
    . i wouldnt surprised if someone mining shitcoin on that box.

    Great Provider: Nexusbytes,LunaNode, LetBox, Hetzner

Sign In or Register to comment.