New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Rootserver VS2-free from euserv.com
Info from euserv.com
The root server model "VS2-free" is based on the new container-based vServer platform from EUserv and offers hosting in a virtualized Linux environment with full root rights and all associated advantages of your own server.
The model "VS2-free" can be used free of charge in the basic version with IPv6 and is ideal for testing, as a development environment or as the basis for creating larger and growing systems.
https://www.euserv.com/en/virtual-private-server/root-vserver/v2/vs2-free.php?pk_campaign=NL-DE
good luck in testing your server
Comments
Thank for sharing!
I guess it was posted earlier as well
Anyway at that time when i rebooted server it was stuck in processing status in thuer control panel still in same status today. so i wouldn't waste time fiddling around better get NAT with port forwarded or mini vps
good share.
nice post
Here`s a Bench
only one month free
Thank you they activated me after 3 hours, everything is already up and running .
I wonder if there's a time limit for these machines.
Or a monthly billing cycle of $0..
Thank you for sharing this. Free is always good.
anyone can help me, How to access shell ipv6 to login?
becauce at my country only ipv4
You need a jump host which has both IPv4 connection and IPv6 connection.
Recommend Vultr and DO, they charge hourly.
Or use the Free IPv6 Tunnel provided by HE
https://tunnelbroker.net/
Easiest way would be to install the package 'miredo' on ANOTHER Linux VPS (or a VM on your PC ) then connect from there.
#apt-get install miredo
It should start working automatically after installation. no configuration needed.
You can control it using:
#service miredo start/stop/restart
(Or equivalent on Centos)
Miredo uses Teredo tunneling Google it for more info
OK thanks you,, my problem has been solved
OK thanks for your attentions..
i'm using command
ssh [email protected]
Socks proxy should work just fine.
Windows have teredo (miredo on windows) tunneling as builtin since winxp
Teredo can be enabled with:
netsh interface ipv6 set teredo default (Source: https://de.wikipedia.org/wiki/Teredo#Microsoft_Windows)
After this you can use putty to access your virtual server.
The fastest way is to use the full server name
srv[yourid].blue.kundencontroller.de
Source:
https://en.wikipedia.org/wiki/Teredo_tunneling
https://de.wikipedia.org/wiki/Teredo#Microsoft_Windows
vServer-News: IPv4 address for free server "VS2-free"
From now on, all users of the free server "VS2-free" can optionally add an
IPv4 address to the server. In addition to the IPv6 address included as
standard, the server can be upgraded to full dual-stack operation and is
therefore also accessible to participants who still use the old IPv4
address space.
Here you can find all information about the server "VS2-Free":
http://go.euserv.org/WK
You can select the IPv4 address at any time in the customer center ->
contract -> book IPv4 addresses and then configure it on your server.
Despite the frequency of the word 'free', the IPv4 addresses still seem to be €1.01 in the spec., and unspecified 'costs' are mentioned when you try to add one, so I haven't.
I have order a IPv4. It cost 2 EUR onetime and 1 EUR per month in my case. I think this is more than ok for a root vps.
Dedicated IPv4 is over my budget.
Hope to add IPv4 NAT support... (with lower cost or FREE! )
^^ realy george . 1 EUR thats one burger on mcd ...
Really helpful.Thank you!
Yes True
Hello,
do you can to test benchmark thats free server?
thanks you
`----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz
Number of cores : 1
CPU frequency : 3759.348 MHz
Total size of Disk : 9.8 GB (0.8 GB Used)
Total amount of Mem : 976 MB (50 MB Used)
Total amount of Swap : 976 MB (0 MB Used)
System uptime : 0 days, 0 hour 7 min
Load average : 9.11, 8.96, 8.54
OS : Debian GNU/Linux 10
Arch : x86_64 (64 Bit)
Kernel : 4.20.8-1.el7.elrepo.x86_64
I/O speed(1st run) : 118 MB/s
I/O speed(2nd run) : 125 MB/s
I/O speed(3rd run) : 78.9 MB/s
Average I/O speed : 107.3 MB/s
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 75.6MB/s
Linode, Tokyo2, JP 139.162.65.37 2.54MB/s
Linode, Singapore, SG 139.162.23.4 14.0KB/s
Linode, London, UK 176.58.107.39 13.8MB/s
Linode, Frankfurt, DE 139.162.130.8 32.7MB/s
Linode, Fremont, CA 50.116.14.9 2.32MB/s
Softlayer, Dallas, TX 173.192.68.18 8.40MB/s
Softlayer, Seattle, WA 67.228.112.250 4.02MB/s
Softlayer, Frankfurt, DE 159.122.69.4 66.7MB/s
Softlayer, Singapore, SG 119.81.28.170 2.94MB/s
Softlayer, HongKong, CN 119.81.130.170 2.14MB/s
----------------------------------------------------------------------`
`# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
Yet-Another-Bench-Script
v2020-02-10
https://github.com/masonr/yet-another-bench-script
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Fri 13 Mar 2020 07:00:14 AM CET
Basic System Information:
Processor : Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz
CPU cores : 1 @ 3740.670 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 976Mi
Swap : 976Mi
Disk : 9.8G
fio Disk Speed Tests (Mixed R/W 50/50):
iperf3 Network Speed Tests (IPv4):
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Bouygues Telecom | Paris, FR (10G) | 241 Mbits/sec | 444 Mbits/sec
Online.net | Paris, FR (10G) | 379 Mbits/sec | 197 Mbits/sec
WorldStream | The Netherlands (10G) | 204 Mbits/sec | 524 Mbits/sec
wilhelm.tel | Hamburg, DE (10G) | 431 Mbits/sec | 205 Mbits/sec
Biznet | Bogor, Indonesia (1G) | 555 Mbits/sec | 45.5 Mbits/sec
Hostkey | Moscow, RU (1G) | 412 Mbits/sec | 830 Mbits/sec
Velocity Online | Tallahassee, FL, US (10G) | 469 Mbits/sec | 99.3 Mbits/sec
Airstream Communications | Eau Claire, WI, US (10G) | 624 Mbits/sec | 133 Mbits/sec
Hurricane Electric | Fremont, CA, US (10G) | 613 Mbits/sec | 149 Mbits/sec
iperf3 Network Speed Tests (IPv6):
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Bouygues Telecom | Paris, FR (10G) | 683 Mbits/sec | 580 Mbits/sec
Online.net | Paris, FR (10G) | 462 Mbits/sec | 610 Mbits/sec
WorldStream | The Netherlands (10G) | 743 Mbits/sec | 500 Mbits/sec
wilhelm.tel | Hamburg, DE (10G) | 671 Mbits/sec | 535 Mbits/sec
Airstream Communications | Eau Claire, WI, US (10G) | 467 Mbits/sec | 245 Mbits/sec
Hurricane Electric | Fremont, CA, US (10G) | 431 Mbits/sec | 122 Mbits/sec
Geekbench 5 test failed. Run manually to determine cause.
`
Additional information
In this free vps you can add ftp quota
10,000 MB, plus an IPv4-Address fee of 1 euro, this is an interesting proposal, just install rclone and get to work
thanks you
Problems with vServer VS2-free from euserv.com
I have tried very hard on this one month free VPS, making me mad.
Either it is completely unable to login to the ssh shell, or it is unable to issue your commands once logged in, if you're lucky enough. The screen appears so slow that make my working on the command window impossible.
In the browser interface, the same problem occurs. The pages load very slowly, and strange enough, after I have changed the default ssh login pass, I still have to use the old password to login into the webconsole.
If you want to do something serious, such as running a decent website or some coding, forget it! I don't know how its paid VPS can be like. If the free version is so terrible, their paid plans can be no better.
Yeah, I can confirm that. Their nodes are overloaded as much. If you want to install for example apache2 it would take around 15 minutes to get it installed. I also order a IPv4 before testing VPS but I think I will just let it to expire as using this VPS is useless.
I know its free but looks like they do not monitor any activity on their free nodes.
Yeah, its free, and slow as hell.
. i wouldnt surprised if someone mining shitcoin on that box.