Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


SoftEther - Very powerful, easy-to-use, multi-protocol VPN software - Page 7
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

SoftEther - Very powerful, easy-to-use, multi-protocol VPN software

123457»

Comments

  • did any one tell me how to install softether vpn in my server is there any gui for this softether to install

  • MakenaiMakenai Member
    edited March 2015

    Hey guys, I've written the guide I promised (Softether setup on OpenWRT)
    In the guide I've completely described the process of manually compiling the packages needed in case you do not have architecture which has precompiled packages.
    I've also described two different networking solutions for VPN clients and how to accomplish them, that is:

    1) VPN clients are in the same subnet as your local clients

    I.E your local PC has 192.168.1.2 and the VPN client 192.168.1.3

    2) VPN clients are in different subnet than your local clients

    I.E your local PC has IP 192.168.1.2 and the VPN client 192.168.50.2

    If you are interested you can check out the guide here
    http://wordpress.tirlins.com/?p=63

    People who have shown interest before: @netomx, @arztde

    I would also be thankful if you could PM me orthographic and grammatical mistakes you find in the guide.

    Thanked by 2Nyr netomx
  • netomxnetomx Moderator, Veteran

    @Makenai said:
    Hey guys, I've written the guide I promised (Softether setup on OpenWRT)
    In the guide I've completely described the process of manually compiling the packages needed in case you do not have architecture which has precompiled packages.
    I've also described two different networking solutions for VPN clients and how to accomplish them, that is:

    1) VPN clients are in the same subnet as your local clients

    I.E your local PC has 192.168.1.2 and the VPN client 192.168.1.3

    2) VPN clients are in different subnet than your local clients

    I.E your local PC has IP 192.168.1.2 and the VPN client 192.168.50.2

    If you are interested you can check out the guide here
    http://wordpress.tirlins.com/?p=63

    People who have shown interest before: netomx, arztde

    I would also be thankful if you could PM me orthographic and grammatical mistakes you find in the guide.

    @Makenai said:
    Hey guys, I've written the guide I promised (Softether setup on OpenWRT)
    In the guide I've completely described the process of manually compiling the packages needed in case you do not have architecture which has precompiled packages.
    I've also described two different networking solutions for VPN clients and how to accomplish them, that is:

    1) VPN clients are in the same subnet as your local clients

    I.E your local PC has 192.168.1.2 and the VPN client 192.168.1.3

    2) VPN clients are in different subnet than your local clients

    I.E your local PC has IP 192.168.1.2 and the VPN client 192.168.50.2

    If you are interested you can check out the guide here
    http://wordpress.tirlins.com/?p=63

    People who have shown interest before: netomx, arztde

    I would also be thankful if you could PM me orthographic and grammatical mistakes you find in the guide.

    I will on the weekend, I'm going to my vacations

  • MakenaiMakenai Member
    edited April 2015

    Forked the el1n OpenWRT softether repo and updated a few things, compiled packages for the newest Softether version.

    http://vpslv.tirlins.com/openwrt/packs/4.15-9538/

  • how to setting local bridge on windows vps, i try but doesnt work

  • netomxnetomx Moderator, Veteran

    Makenai said: Forked the el1n OpenWRT softether repo and updated a few things, compiled packages for the newest Softether version.

    I can't use it on my routers, how much ram do you need?

  • I'm a new user and I want to know how I can create login for SoftEther VPN Client Manager. do I need a normal VPN login or I need VPS ? please I need help.

Sign In or Register to comment.