Cheap KVM VPS on Singapore for Wireguard and VPN usage

Letisbest · February 22

As subject, i am looking for Singapore KVM VPS for Wireguard and VPN usage.

For single person use only. So need more have high specs. Probably 512MB and 500gb monthly bandwidth

Any providers below 16$ per year?

mhosting_in · February 22

it is difficult to find a provider in Asia region with that budget or almost not possible.

Letisbest · February 22

@mhosting_in said:
it is difficult to find a provider in Asia region with that budget or almost not possible.

Yeah i guess so.
I was watching a youtube on setting up own wireguard.
Since i have some time on hand, i thought, why not?

kuduku · February 22

@Letisbest said:
As subject, i am looking for Singapore KVM VPS for Wireguard and VPN usage.

For single person use only. So need more have high specs. Probably 512MB and 500gb monthly bandwidth

Any providers below 16$ per year?

NAT by @WebHorizon

sibaper · February 22

ask @MaxKVM maybe they had something for you?

They had $1.5/m ($18/y) offering before

fbmy · February 22

MaxKVM is best choice

boogerman · February 22

Check out Gullo's LittleVZ from @Cam.

https://hosting.gullo.me/pricing

Letisbest · February 22

@boogerman said:
Check out Gullo's LittleVZ from @Cam.

https://hosting.gullo.me/pricing

thanks for the link. i am doing the wireguard.
Is the OpenVZ setup same as the KVM?

boogerman · February 22

You can run wireguard-go on VZ. (https://d.sb/2019/07/wireguard-on-openvz-lxc).

Those LittleVZ can even run docker. So you can even run wireguard-go inside docker. (https://github.com/masipcat/wireguard-go-docker)

Letisbest · February 22

@boogerman said:
You can run wireguard-go on VZ. (https://d.sb/2019/07/wireguard-on-openvz-lxc).

Those LittleVZ can even run docker. So you can even run wireguard-go inside docker. (https://github.com/masipcat/wireguard-go-docker)

thanks for the info
I was thinking to run this...
https://github.com/angristan/wireguard-install

kuduku · February 22

@Letisbest said:

@boogerman said:
You can run wireguard-go on VZ. (https://d.sb/2019/07/wireguard-on-openvz-lxc).

Those LittleVZ can even run docker. So you can even run wireguard-go inside docker. (https://github.com/masipcat/wireguard-go-docker)

thanks for the info
I was thinking to run this...
https://github.com/angristan/wireguard-install

@Letisbest said:

@boogerman said:
You can run wireguard-go on VZ. (https://d.sb/2019/07/wireguard-on-openvz-lxc).

Those LittleVZ can even run docker. So you can even run wireguard-go inside docker. (https://github.com/masipcat/wireguard-go-docker)

thanks for the info
I was thinking to run this...
https://github.com/angristan/wireguard-install

I am running @Nyr script https://github.com/Nyr/wireguard-install on @WebHorizon 512GB SG NATwhich is OpenVZ
No issues , ipv4 and ipv6 both work fine

boogerman · February 22

you can't go wrong with 4.2$/yr .

https://my.webhorizon.in/order/main/index/nat + 40% off Code TripToSG

WebHorizon · February 22

Thanks for the mention @kuduku

Our NAT VPS are ovz based. NAT IPv4+IPv6 VPS

WebHorizon · February 22

@boogerman said:
you can't go wrong with 4.2$/yr .

https://my.webhorizon.in/order/main/index/nat + 40% off Code TripToSG

Yes, that code is now valid till 25th 🙂

Letisbest · February 22

@WebHorizon said:
Thanks for the mention @kuduku

Our NAT VPS are ovz based. NAT IPv4+IPv6 VPS

thanks for the link. Will have a look.

kuduku · February 22

@WebHorizon said:

@boogerman said:
you can't go wrong with 4.2$/yr .

https://my.webhorizon.in/order/main/index/nat + 40% off Code TripToSG

Yes, that code is now valid till 25th 🙂

When did the code become active again ?

Letisbest · February 22

@WebHorizon said:

@boogerman said:
you can't go wrong with 4.2$/yr .

https://my.webhorizon.in/order/main/index/nat + 40% off Code TripToSG

Yes, that code is now valid till 25th 🙂

Great !!!!!

boogerman · February 22

@kuduku said:

I am running @Nyr script https://github.com/Nyr/wireguard-install on @WebHorizon 512GB SG NATwhich is OpenVZ
No issues , ipv4 and ipv6 both work fine

When Nyr scripts detect it's running inside VZ, it automatically switches to BoringTun (a user-space wireguard implementation , just like wireguard-go).

WebHorizon · February 22

@kuduku said:

@WebHorizon said:

@boogerman said:
you can't go wrong with 4.2$/yr .

https://my.webhorizon.in/order/main/index/nat + 40% off Code TripToSG

Yes, that code is now valid till 25th 🙂

When did the code become active again ?

yesterday, when some services needed to be recreated.
& this code was also provided as a compensation to select users.
though it is public now, can be used till 25th

bark · February 22

You may want to take a look at MrVM.
Singapore is now available again for a short time. $7.00 yr.
https://clients.mrvm.net/cart.php?a=confproduct&i=0
Yes, it's only 256mg, but it works perfectly for WireGuard, OCSERV (openconnect), and Shadowsocks. 500GB of transfer too.

As you may have discovered, WebHorizon has had serious issues lately, and it uses the OVH network (clunky at times unfortunately).
The MrVM SG network continues to be fast, stable, and reliable.
Set it, forget it.

(We have both MrVM and WebHorizon SG testbeds, so...)
And Gullo's pricing is too high right now.

BTW, if you are running on an OpenVZ container, the installation for WireGuard is not the same as a KVM. Angristan throws an OVZ error. So just use the NYR roadwarrior, super easy: https://github.com/Nyr/wireguard-install
Simply pay attention to the correct port settings.

The NAT and WireGuard setups can seem a little complicated, but it just takes a few minutes to figure out how it all works. Very satisfying though, all in all.

Have fun with it.

Letisbest · February 22

@bark said:
You may want to take a look at MrVM.
Singapore is now available again for a short time. $7.00 yr.
https://clients.mrvm.net/cart.php?a=confproduct&i=0
Yes, it's only 256mg, but it works perfectly for WireGuard, OCSERV (openconnect), and Shadowsocks. 500GB of transfer too.

As you may have discovered, WebHorizon has had serious issues lately, and it uses the OVH network (clunky at times unfortunately).
The MrVM SG network continues to be fast, stable, and reliable.
Set it, forget it.

(We have both MrVM and WebHorizon SG testbeds, so...)
And Gullo's pricing is too high right now.

BTW, if you are running on an OpenVZ container, the installation for WireGuard is not the same as a KVM. Angristan throws an OVZ error. So just use the NYR roadwarrior, super easy: https://github.com/Nyr/wireguard-install
Simply pay attention to the correct port settings.

The NAT and WireGuard setups can seem a little complicated, but it just takes a few minutes to figure out how it all works. Very satisfying though, all in all.

Have fun with it.

thanks for the info.
newbie here. Not sure to use the NAT IP or the Internal IP. I tried both on Port 22. Cannot get a connection.

lol.....

kuduku · February 22

@Letisbest said:

@bark said:
You may want to take a look at MrVM.
Singapore is now available again for a short time. $7.00 yr.
https://clients.mrvm.net/cart.php?a=confproduct&i=0
Yes, it's only 256mg, but it works perfectly for WireGuard, OCSERV (openconnect), and Shadowsocks. 500GB of transfer too.

As you may have discovered, WebHorizon has had serious issues lately, and it uses the OVH network (clunky at times unfortunately).
The MrVM SG network continues to be fast, stable, and reliable.
Set it, forget it.

(We have both MrVM and WebHorizon SG testbeds, so...)
And Gullo's pricing is too high right now.

BTW, if you are running on an OpenVZ container, the installation for WireGuard is not the same as a KVM. Angristan throws an OVZ error. So just use the NYR roadwarrior, super easy: https://github.com/Nyr/wireguard-install
Simply pay attention to the correct port settings.

The NAT and WireGuard setups can seem a little complicated, but it just takes a few minutes to figure out how it all works. Very satisfying though, all in all.

Have fun with it.

thanks for the info.
newbie here. Not sure to use the NAT IP or the Internal IP. I tried both on Port 22. Cannot get a connection.

lol.....

use external ipv4 + SSH port as given in email
or ipv6 + Port 22

WebHorizon · February 22

@Letisbest you can create a ticket for help SSH into the VPS, as a new user I see

bark · February 22

@Letisbest said:

thanks for the info.
newbie here. Not sure to use the NAT IP or the Internal IP. I tried both on Port 22. Cannot get a connection.

It seems difficult, sure. Read the email carefully. Then go into your account and poke around. It's hard the first time for everybody I think, but once you get it? Nuttin.

Here's how it works. There's one 'public' or 'external' ipv4 address. This is for a bunch of people. The ipv4 is shared by using 'ports'. In your account, you will find an 'external' or 'public' address. Use that, then use the last octect of your 'private' ip address as the first numbers in your allotted ports.

Example: public ip = 123.456.78.9, use that. If your private ip is 987.6.54.321, then your assigned port for SSH access would be 32121 (321 being the last octect, and 21 the assigned for SSH access.

So, in putty it's 123.456.78.9:32121

With WireGuard, the NYR script will find the correct external address, then you have to put in one of your assigned ports. Case above you might do 32120.

Funny thing is, it works really well. It's dead cheap. And a great little arrow to add to your quiver of knowledge for the future.

Letisbest · February 22

@bark said:

@Letisbest said:

thanks for the info.
newbie here. Not sure to use the NAT IP or the Internal IP. I tried both on Port 22. Cannot get a connection.

It seems difficult, sure. Read the email carefully. Then go into your account and poke around. It's hard the first time for everybody I think, but once you get it? Nuttin.

Here's how it works. There's one 'public' or 'external' ipv4 address. This is for a bunch of people. The ipv4 is shared by using 'ports'. In your account, you will find an 'external' or 'public' address. Use that, then use the last octect of your 'private' ip address as the first numbers in your allotted ports.

Example: public ip = 123.456.78.9, use that. If your private ip is 987.6.54.321, then your assigned port for SSH access would be 32121 (321 being the last octect, and 21 the assigned for SSH access.

So, in putty it's 123.456.78.9:32121

With WireGuard, the NYR script will find the correct external address, then you have to put in one of your assigned ports. Case above you might do 32120.

Funny thing is, it works really well. It's dead cheap. And a great little arrow to add to your quiver of knowledge for the future.

Thanks for your help. Appreciated.
Managed to connect.
When i ran the Nyr script, it prompted TUN not installed.
Went back to "Control Panel" > "VPS Configuration", i had both "Tun/Tap and
"PPP" enabled. It continues to prompt TUN not installed.

Do i need to do anything else?

fazar · February 22

@Letisbest said:

When i ran the Nyr script, it prompted TUN not installed.
Went back to "Control Panel" > "VPS Configuration", i had both "Tun/Tap and
"PPP" enabled. It continues to prompt TUN not installed.

Do i need to do anything else?

you may need to reboot VM after enabling/disabling TUN/TAP/FUSE/GRE via control panel.

Letisbest · February 23

@fazar said:

@Letisbest said:

When i ran the Nyr script, it prompted TUN not installed.
Went back to "Control Panel" > "VPS Configuration", i had both "Tun/Tap and
"PPP" enabled. It continues to prompt TUN not installed.

Do i need to do anything else?

you may need to reboot VM after enabling/disabling TUN/TAP/FUSE/GRE via control panel.

Ah yes. got it.

I ran NYR script, it asked the following:

This server is behind NAT. What is the public IPv4 address or hostname?
Public IPv4 address / hostname :
What port should WireGuard listen to?
Port [51820]:

I entered the public address given and also the key in 51820.
Followed the steps and export the conf. However, no connection.
Did i get it wrong?

l2o88j · February 23

@Letisbest said:

@fazar said:

@Letisbest said:

When i ran the Nyr script, it prompted TUN not installed.
Went back to "Control Panel" > "VPS Configuration", i had both "Tun/Tap and
"PPP" enabled. It continues to prompt TUN not installed.

Do i need to do anything else?

you may need to reboot VM after enabling/disabling TUN/TAP/FUSE/GRE via control panel.

Ah yes. got it.

I ran NYR script, it asked the following:

This server is behind NAT. What is the public IPv4 address or hostname?

Public IPv4 address / hostname :

What port should WireGuard listen to?

Port [51820]:

I entered the public address given and also the key in 51820.
Followed the steps and export the conf. However, no connection.
Did i get it wrong?

51820 is wireguard default port. You need to provide the ports assigned to you instead of 51820.

You should have received an email with ports 1000 to 1020, then you need to use any one port number from your range

Letisbest · February 23

@l2o88j said:

@Letisbest said:

@fazar said:

@Letisbest said:

When i ran the Nyr script, it prompted TUN not installed.
Went back to "Control Panel" > "VPS Configuration", i had both "Tun/Tap and
"PPP" enabled. It continues to prompt TUN not installed.

Do i need to do anything else?

you may need to reboot VM after enabling/disabling TUN/TAP/FUSE/GRE via control panel.

Ah yes. got it.

I ran NYR script, it asked the following:

This server is behind NAT. What is the public IPv4 address or hostname?

Public IPv4 address / hostname :

What port should WireGuard listen to?

Port [51820]:

I entered the public address given and also the key in 51820.
Followed the steps and export the conf. However, no connection.
Did i get it wrong?

51820 is wireguard default port. You need to provide the ports assigned to you instead of 51820.

You should have received an email with ports 1000 to 1020, then you need to use any one port number from your range

Wow....done...thanks mate!!!!

bark · February 23

Splained above as:

"With WireGuard, the NYR script will find the correct external address, then you have to put in one of your assigned ports. Case above you might do 32120."

Glad you got it.

Howdy, Stranger!

Categories

In this Discussion

Cheap KVM VPS on Singapore for Wireguard and VPN usage

Comments

Howdy, Stranger!

Quick Links

Categories

In this Discussion

Cheap KVM VPS on Singapore for Wireguard and VPN usage

Comments