Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


$10/y LXC container in Antwerp - Page 2
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

$10/y LXC container in Antwerp

24

Comments

  • any restriction on reinstalling the templates?

  • stefemanstefeman Member
    edited January 2021

    @licher70 said:
    any restriction on reinstalling the templates?

    Have you seen any provider bill you for automatic re-installs? I have not so I doubt this one will either xD

  • @stefeman said:

    @licher70 said:
    any restriction on reinstalling the templates?

    Have you seen any provider bill you for automatic re-installs? I have not so I doubt this one will either xD

    Yes, there is one, so just wanted to make sure

  • @licher70 said:
    any restriction on reinstalling the templates?

    None except for your patience. It does take a few minutes.

    Thanked by 1licher70
  • indeed, nice offer

  • Probably a dumb question, but in the payment methods, is it only just "Bitcoin" or it can also accept other cryptocurrencies? What is the payment processor behind it?

  • GanonkGanonk Member
    edited January 2021

    @Neoon said:

    A bit bigger but should fit:

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    # Yet-Another-Bench-Script #
    # v2020-12-29 #
    # https://github.com/masonr/yet-another-bench-script #
    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

    Thu Jan 7 13:00:52 UTC 2021

    Basic System Information:
    ---------------------------------
    Processor : AMD EPYC 7451 24-Core Processor
    CPU cores : 4 @ 2295.578 MHz
    AES-NI : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM : 7.8 GiB
    Swap : 0.0 KiB
    Disk : 96.8 GiB

    fio Disk Speed Tests (Mixed R/W 50/50):
    ---------------------------------
    Block Size | 4k (IOPS) | 64k (IOPS)
    ------ | --- ---- | ---- ----
    Read | 70.78 MB/s (17.6k) | 698.14 MB/s (10.9k)
    Write | 70.97 MB/s (17.7k) | 701.82 MB/s (10.9k)
    Total | 141.75 MB/s (35.4k) | 1.39 GB/s (21.8k)
    | |
    Block Size | 512k (IOPS) | 1m (IOPS)
    ------ | --- ---- | ---- ----
    Read | 1.15 GB/s (2.2k) | 1.18 GB/s (1.1k)
    Write | 1.21 GB/s (2.3k) | 1.26 GB/s (1.2k)
    Total | 2.36 GB/s (4.6k) | 2.45 GB/s (2.3k)

    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider | Location (Link) | Send Speed | Recv Speed
    | | |
    Clouvider | London, UK (10G) | busy | busy
    Online.net | Paris, FR (10G) | 878 Mbits/sec | 882 Mbits/sec
    WorldStream | The Netherlands (10G) | 871 Mbits/sec | 913 Mbits/sec
    Biznet | Jakarta, Indonesia (1G) | 657 Mbits/sec | 105 Mbits/sec
    Clouvider | NYC, NY, US (10G) | 767 Mbits/sec | 467 Mbits/sec
    Velocity Online | Tallahassee, FL, US (10G) | 644 Mbits/sec | 280 Mbits/sec
    Clouvider | Los Angeles, CA, US (10G) | busy | busy
    Iveloz Telecom | Sao Paulo, BR (2G) | busy | busy

    iperf3 Network Speed Tests (IPv6):
    ---------------------------------
    Provider | Location (Link) | Send Speed | Recv Speed
    | | |
    Clouvider | London, UK (10G) | busy | busy
    Online.net | Paris, FR (10G) | 674 Mbits/sec | 692 Mbits/sec
    WorldStream | The Netherlands (10G) | 865 Mbits/sec | 858 Mbits/sec
    Clouvider | NYC, NY, US (10G) | 720 Mbits/sec | 431 Mbits/sec
    Clouvider | Los Angeles, CA, US (10G) | busy | busy

    Geekbench 5 Benchmark Test:
    ---------------------------------
    Test | Value
    |
    Single Core | 726
    Multi Core | 2596
    Full Test | https://browser.geekbench.com/v5/cpu/5753717

    image

  • not bad, but waiting your 2TB deal :/

    ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

    Yet-Another-Bench-Script

    v2020-12-29

    https://github.com/masonr/yet-another-bench-script

    ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

    Sat Jan 23 06:12:36 UTC 2021

    Basic System Information:

    Processor : AMD EPYC 7451 24-Core Processor
    CPU cores : 1 @ 2891.893 MHz
    AES-NI : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM : 512.0 MiB
    Swap : 512.0 MiB
    Disk : 6.8 GiB

    fio Disk Speed Tests (Mixed R/W 50/50):

    Block Size 4k (IOPS) 64k (IOPS)
    Read 47.14 MB/s (11.7k) 387.19 MB/s (6.0k)
    Write 47.19 MB/s (11.7k) 389.23 MB/s (6.0k)
    Total 94.33 MB/s (23.5k) 776.43 MB/s (12.1k)
    Block Size 512k (IOPS) 1m (IOPS)
    ------ --- ---- ---- ----
    Read 612.19 MB/s (1.1k) 652.59 MB/s (637)
    Write 644.71 MB/s (1.2k) 696.05 MB/s (679)
    Total 1.25 GB/s (2.4k) 1.34 GB/s (1.3k)

    iperf3 Network Speed Tests (IPv4):

    Provider | Location (Link) | Send Speed | Recv Speed
    | | |
    Clouvider | London, UK (10G) | 909 Mbits/sec | 387 Mbits/sec
    Online.net | Paris, FR (10G) | 81.1 Mbits/sec | 593 Mbits/sec
    WorldStream | The Netherlands (10G) | 42.1 Mbits/sec | 593 Mbits/sec
    Biznet | Jakarta, Indonesia (1G) | 416 Mbits/sec | 52.0 Mbits/sec
    Clouvider | NYC, NY, US (10G) | busy | 232 Mbits/sec
    Velocity Online | Tallahassee, FL, US (10G) | 784 Mbits/sec | 98.8 Mbits/sec
    Clouvider | Los Angeles, CA, US (10G) | 240 Mbits/sec | 22.6 Mbits/sec
    Iveloz Telecom | Sao Paulo, BR (2G) | 713 Mbits/sec | 44.4 Mbits/sec

    iperf3 Network Speed Tests (IPv6):

    Provider | Location (Link) | Send Speed | Recv Speed
    | | |
    Clouvider | London, UK (10G) | 908 Mbits/sec | 650 Mbits/sec
    Online.net | Paris, FR (10G) | 905 Mbits/sec | 724 Mbits/sec
    WorldStream | The Netherlands (10G) | 897 Mbits/sec | 810 Mbits/sec
    Clouvider | NYC, NY, US (10G) | 697 Mbits/sec | 391 Mbits/sec
    Clouvider | Los Angeles, CA, US (10G) | 535 Mbits/sec | 271 Mbits/sec

    Geekbench 5 Benchmark Test:

    Test | Value
    |
    Single Core | 689
    Multi Core | 708
    Full Test | https://browser.geekbench.com/v5/cpu/6055641

  • @ricannardo said:
    Probably a dumb question, but in the payment methods, is it only just "Bitcoin" or it can also accept other cryptocurrencies? What is the payment processor behind it?

    There is no payment processor. I just ditched Bitpay. Any payment go straight to our wallet.

    For now it's Bitcoin and Bitcoin Cash.

    Thanked by 1pike
  • @lightforce said:
    not bad, but waiting your 2TB deal :/

    Ppl keep asking me but that deal was a mistake, it's not coming back.

    There are deals on LEB and LES if you're still interested, still awesome deals but not for that price.

  • @stefeman said:

    @licher70 said:
    any restriction on reinstalling the templates?

    Have you seen any provider bill you for automatic re-installs? I have not so I doubt this one will either xD

    Virmach does that.

    30 free reinstall.

    https://img.x11.pw/image/FsW

    Don't know whether they will charge you to help you reinstall.

  • yoursunnyyoursunny Member, IPv6 Advocate
    edited January 2021

    @Fritz said:

    @stefeman said:

    @licher70 said:
    any restriction on reinstalling the templates?

    Have you seen any provider bill you for automatic re-installs? I have not so I doubt this one will either xD

    Virmach does that.

    30 free reinstall.

    https://img.x11.pw/image/FsW

    Don't know whether they will charge you to help you reinstall.

    Virmach has a reinstall restriction on WHMCS, but there's no limit once you get into SolusVM.
    However, Windows cannot be reinstated via SolusVM.

    They'll most likely charge you at least $3 for manual reinstall.

    Thanked by 1skorous
  • @yoursunny said:

    @Fritz said:

    @stefeman said:

    @licher70 said:
    any restriction on reinstalling the templates?

    Have you seen any provider bill you for automatic re-installs? I have not so I doubt this one will either xD

    Virmach does that.

    30 free reinstall.

    https://img.x11.pw/image/FsW

    Don't know whether they will charge you to help you reinstall.

    Virmach has a reinstall restriction on WHMCS, but there's no limit once you get into SolusVM.
    However, Windows cannot be reinstated via SolusVM.

    They'll most likely charge you at least $3 for manual reinstall.

    Yes, I'm aware of that.

    Maybe they miss to limit reinstall via SolusVM. Sshh...

  • @marvel said: For now it's Bitcoin and Bitcoin Cash.

    Trying to pay it using Bitcoin Cash, but it only shows "Could not generate new Bitcoin Cash address." Please fix it as soon as possible...

  • FritzFritz Veteran
    edited January 2021

    @marvel

    Off topic.

    Do you allow virtualization (nested virt) inside your premium KVM line?

  • @Fritz said:
    @marvel

    Off topic.

    Do you allow virtualization (nested virt) inside your premium KVM line?

    Yes it's enabled.

  • @ricannardo said:

    @marvel said: For now it's Bitcoin and Bitcoin Cash.

    Trying to pay it using Bitcoin Cash, but it only shows "Could not generate new Bitcoin Cash address." Please fix it as soon as possible...

    Thanks I will check this out but it probably won't be for today.

  • @ricannardo said:

    @marvel said: For now it's Bitcoin and Bitcoin Cash.

    Trying to pay it using Bitcoin Cash, but it only shows "Could not generate new Bitcoin Cash address." Please fix it as soon as possible...

    Ah wait I think it's fixed. Try now :)

  • benj0xbenj0x Member
    edited January 2021

    5TB bandwidth each month, NAT IPv4, 10$/y (excl. VAT) and most important a /64????

    That's a great deal for being hosted in Belgium. Time for another monitoring node - ordered.

  • @benj0x said:
    5TB bandwidth each month, NAT IPv4, 10$/y (excl. VAT) and most important a /64????

    That's a great deal for being hosted in Belgium. Time for another monitoring node - ordered.

    Thanks I'm glad you like it, have fun with it :)

  • Btw ppl if you pay with crypto remember the service will be delivered when your payment has 2 confirmations. This can take some time usually around 1 hour, sometimes longer.

    So before opening a ticket please take note of this.

    Thanks :)

    Thanked by 1cold
  • ricannardoricannardo Member
    edited January 2021

    @marvel said: Ah wait I think it's fixed. Try now

    Still can't pay. It just stuck on loading after I click on BCH button. Bonus: for some reason I can't also browse the whole site until I kill the entire browser process, and then it returns to normal.
    Fixed

    Thanked by 1marvel
  • @marvel said:

    @benj0x said:
    5TB bandwidth each month, NAT IPv4, 10$/y (excl. VAT) and most important a /64????

    That's a great deal for being hosted in Belgium. Time for another monitoring node - ordered.

    Thanks I'm glad you like it, have fun with it :)

    Looks tempting and I want try. but quite far from my location. SEA :D

  • @ricannardo said:

    @marvel said: Ah wait I think it's fixed. Try now

    Still can't pay. It just stuck on loading after I click on BCH button. Bonus: for some reason I can't also browse the whole site until I kill the entire browser process, and then it returns to normal.
    Fixed

    Good to hear it works now, thanks for the feedback :)

  • I didn't do anything but load average is higher than 0.5-0.9. Is this load average value of host node or container itself?

  • @Arirang said: I didn't do anything but load average is higher than 0.5-0.9. Is this load average value of host node or container itself?

    Load average numbers is from the host node itself, according to https://unix.stackexchange.com/a/132024

  • Daniel15Daniel15 Veteran
    edited January 2021

    @ricannardo said:

    @Arirang said: I didn't do anything but load average is higher than 0.5-0.9. Is this load average value of host node or container itself?

    Load average numbers is from the host node itself, according to https://unix.stackexchange.com/a/132024

    That Linux Stack Exchange answer is outdated. Load average can be virtualized for LXC, but I think it's still opt in and the provider needs to enable an lxcfs option to virtualize more stuff in /proc (eg see https://forum.proxmox.com/threads/lxc-loadavg.44463/).

    Thanked by 1Arirang
  • Oooh, thank you. I hadn't noticed that change.

  • @Arirang said:
    I didn't do anything but load average is higher than 0.5-0.9. Is this load average value of host node or container itself?

    Can you try this again? Restart your container first though. I added the option in the topic provided by @Daniel15 :)

    Thanked by 2Daniel15 Arirang
  • @Fritz said:

    @stefeman said:

    @licher70 said:
    any restriction on reinstalling the templates?

    Have you seen any provider bill you for automatic re-installs? I have not so I doubt this one will either xD

    Virmach does that.

    30 free reinstall.

    https://img.x11.pw/image/FsW

    Don't know whether they will charge you to help you reinstall.

    AlphaVPS also got this 30 reinstall limitation

Sign In or Register to comment.