New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Waitied till now for the dedictaed 19$ offer.
Do you have more data zone?
Bench.sh
CPU model : Intel(R) Xeon(R) CPU L5420 @ 2.50GHz
Number of cores : 8
CPU frequency : 2003.000 MHz
Total size of Disk : 1843.4 GB (0.8 GB Used)
Total amount of Mem : 24114 MB (110 MB Used)
Total amount of Swap : 24575 MB (0 MB Used)
System uptime : 0 days, 2 hour 1 min
Load average : 0.01, 0.12, 0.08
OS : Debian GNU/Linux 9
Arch : x86_64 (64 Bit)
Kernel : 4.9.0-9-amd64
I/O speed(1st run) : 111 MB/s
I/O speed(2nd run) : 110 MB/s
I/O speed(3rd run) : 110 MB/s
Average I/O speed : 110.3 MB/s
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 109MB/s
Linode, Tokyo2, JP 139.162.65.37 15.8MB/s
Linode, Singapore, SG 139.162.23.4 10.9MB/s
Linode, London, UK 176.58.107.39 26.2MB/s
Linode, Frankfurt, DE 139.162.130.8 21.7MB/s
Linode, Fremont, CA 50.116.14.9 45.5MB/s
Softlayer, Dallas, TX 173.192.68.18 71.4MB/s
Softlayer, Seattle, WA 67.228.112.250 37.7MB/s
Softlayer, Frankfurt, DE 159.122.69.4 18.8MB/s
Softlayer, Singapore, SG 119.81.28.170 8.00MB/s
Softlayer, HongKong, CN 119.81.130.170 9.69MB/s
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Ultrastar A7K2000
Device Model: Hitachi HUA722020ALA331
Serial Number: B8G1UBLW
LU WWN Device Id: 5 000cca 222c0d39f
Firmware Version: JKAOA3NH
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Aug 27 23:41:10 2019 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21154) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 353) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 99
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 35
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 28
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 2
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 25/39)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Short offline Completed without error 00% 28 -
2 Short offline Completed without error 00% 61999 -
3 Short offline Completed without error 00% 60401 -
4 Short offline Completed without error 00% 57538 -
5 Short offline Completed without error 00% 34120 -
6 Short offline Completed without error 00% 33786 -
7 Short offline Completed without error 00% 33277 -
8 Short offline Completed without error 00% 33040 -
9 Short offline Completed without error 00% 31793 -
10 Short offline Completed without error 00% 30500 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Fresh old HDD
Your RPI colo is adding my own disk free of charge?
Looks like it had the power on hours reset. Kind of like rolling back the odometer on a car... except they didn't do a great job of it, since the smart tests with higher hours are still in there. Probably a drive from GoHardDrive if I had to guess.
Is the second short offline test the true age of the drive?
Is there an IPMI/KVM?
Yup! Feel free to include any 2.5" USB powered external hard drive at no extra charge.
There technically is, however, we don't expose them to the public at the moment. They're also super picky about Browser/Java version. For now, you can at least do OS reloads through our portal.
@TNAHosting do you guys have Proxmox 6 as a system in the panel?
Can't wait to get my hands on mine, happy to see that they started provisioning already :-)
I assume it is the really old Quanta (?) IPMI with the "Embedded Server Manager" logo or something? Windows XP works perfectly for those :P
I'd love to be included in the second batch of the Dual L5420 server.
Waiting on the Dual L5420 and the E3-1240 servers to be in stock.
@TNAHosting If you could, count me in for $19 Dual L5420
As promised - here is a bench of the $19/m dedi (CPU is obviously not great, but network seems really nice and the price more than makes up for the less-than-ideal CPU. Overall - glad I got it)
Edit2:
I hate formatting on here.
I got one L5420 Dedicated Server,who need it?
I’ve got one I could give up too - I’m not going to use it as I got a Terrahost special in Norway which is better for my usage. If someone wants one (@AuroraZ ?) let me know and i’ll open a ticket about a transfer.
I can take one. Thanks.
I can take one. Thnx
Hello, do you plan to offer kvm ipmi? I feel that is important for my needs.
@Nekki thank you man but I have one on the way. @TNAHosting had some more stock and he offered me one.
Fair play geez.
Guy, if you want this you need to register an account the TNA and then let me know the address you used so I can get the server moved.
Theres a queue of potential buyers, so let me know if you want it quick-smart or the next in line gets a chance.
If anyone has a E3-1240 server $39 /month server that they don't need, let me know!
Add me to queue pls
@plumberg has ignored me, so it’s going to to the next in line.
Hi. Sorry I am late. If I have lost it, my bad. Sorry.
Neat.
Francisco
Yup, you late bro.
Would it be possible to have two 2.5" SSDs connected to a Raspberry Pi 4 via USB cable?