Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


Need help with Windows VPS
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Need help with Windows VPS

Hello,

I have hypervisor with the following specs:
Intel Xeon D 1520 / 4c/8t / 2,2 - 2,6 GHz
64 GB of RAM DDR4 ECC 2133 MHz

And I have there 30 Windows Server 2012 (KVM based) VPS created all with 2 cores, 2gb ram and 30gb disk and they are not running any resource intensive apps but are all online and for example browsing internet. Management panel is virtualizor.

The issue is that hypervisor is always at 100 / 100 / 100 load and high CPU usage and VMs are very very slow taking forever to load for example speedtest in chrome.

Is there any tip or trick to do here to optimize this so these VPS can work faster? Any effective and smart suggestion is very useful and thank you for your help in advance.

Comments

  • What's causing the load? You need to figure that out first before you can find a solution.

  • Are they all doing Windows Update? I'm assuming this was recently created/done since its not specified

  • Nothing specific has causing the loads and they are not performing Windows update. I have created these VMs myself these are not clients. VMs arent doing anything intensive.

    Pkease check top output:

    top - 19:10:34 up 10 days, 3:14, 1 user, load average: 104.63, 107.12, 110.37
    Tasks: 377 total, 13 running, 364 sleeping, 0 stopped, 0 zombie
    Cpu(s): 80.8%us, 19.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.2%si, 0.0%st
    Mem: 65869228k total, 56645888k used, 9223340k free, 499648k buffers
    Swap: 16375804k total, 2101056k used, 14274748k free, 10369392k cached

    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    126 root 25 5 0 0 0 S 50.1 0.0 1645:55 [ksmd]
    21324 qemu 20 0 6539m 1.9g 6064 S 38.5 3.1 1078:15 /usr/libexec/qemu-kvm -name v1009
    30526 qemu 20 0 6473m 1.9g 6064 R 36.1 3.0 982:53.60 /usr/libexec/qemu-kvm -name v1012
    30787 qemu 20 0 6470m 2.1g 6080 R 35.1 3.4 562:17.98 /usr/libexec/qemu-kvm -name v1029
    5365 qemu 20 0 6435m 2.1g 6076 S 33.8 3.3 777:56.25 /usr/libexec/qemu-kvm -name v1021
    24782 qemu 20 0 6471m 2.1g 6108 R 33.5 3.3 702:02.04 /usr/libexec/qemu-kvm -name v1032
    17450 qemu 20 0 6468m 2.1g 6124 R 33.2 3.3 629:53.45 /usr/libexec/qemu-kvm -name v1025
    6392 qemu 20 0 6396m 2.1g 6076 R 31.8 3.3 651:35.31 /usr/libexec/qemu-kvm -name v1024
    20428 qemu 20 0 6477m 2.0g 6064 S 31.5 3.1 1260:53 /usr/libexec/qemu-kvm -name v1015
    602 qemu 20 0 6381m 2.1g 6080 S 31.2 3.3 568:04.77 /usr/libexec/qemu-kvm -name v1018
    20860 qemu 20 0 6452m 1.9g 6064 S 30.8 3.0 1237:36 /usr/libexec/qemu-kvm -name v1013
    15194 qemu 20 0 6455m 2.1g 6080 S 29.5 3.3 1010:48 /usr/libexec/qemu-kvm -name v1003
    4235 qemu 20 0 6465m 2.1g 6080 S 28.8 3.3 555:33.30 /usr/libexec/qemu-kvm -name v1020

  • your CPU simply isn't strong enough for that amount of windows VMs. you have 4 Cores running like 60, what do you expect? also network connection maybe limiting and causing higher load (assuming this is an OVH HOST-64L guaranteed bw is 250mbit/s).

    bam to hell your TE business plan goes.

    end of story.

    Thanked by 1doughmanes
  • TE tech support makes me miss Nike /24 IP request posts

    Thanked by 1Falzo
  • Also are you running virtio on these vm's also a good practice for windows I have found it to have disk caching set to writeback I know this is not CPU bound however it may help your VMs be smoother

  • mikhomikho Member, Host Rep

    What type of disks do you have?
    Load would also be high if alot of swapping is going on.

Sign In or Register to comment.