Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


SSDVirt 256MB 3GB SSD 250GB KVM-256 Benchmark
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

SSDVirt 256MB 3GB SSD 250GB KVM-256 Benchmark

edited August 2012 in Reviews

This time I will share my benchmark with SSDVirt. Thank's to John

Here is the resources :

Disk Space: 3GB SSD
CPU Cores: 1 x 3.2 Ghz
RAM: 256MB
Bandwidth: 250GB @1Gbps 
1 IPv4 + 5 IPv6
KVM
Node : kvmny01

CPU Info

# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 13
model name      : QEMU Virtual CPU version (cpu64-rhel6)
stepping        : 3
cpu MHz         : 3192.746
cache size      : 4096 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 4
wp              : yes
flags           : fpu de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pse36 clflush mmx fxsr sse sse2 syscall nx lm up pni cx16 hypervisor lahf_lm
bogomips        : 6385.49
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

Memory Info

# cat /proc/meminfo
MemTotal:         254828 kB
MemFree:          213368 kB
Buffers:            8668 kB
Cached:            18536 kB
SwapCached:            0 kB
Active:            18604 kB
Inactive:          14064 kB
Active(anon):       5480 kB
Inactive(anon):      100 kB
Active(file):      13124 kB
Inactive(file):    13964 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:             0 kB
HighFree:              0 kB
LowTotal:         254828 kB
LowFree:          213368 kB
SwapTotal:        180216 kB
SwapFree:         180216 kB
Dirty:                52 kB
Writeback:             0 kB
AnonPages:          5464 kB
Mapped:             4268 kB
Shmem:               116 kB
Slab:               5252 kB
SReclaimable:       2504 kB
SUnreclaim:         2748 kB
KernelStack:         472 kB
PageTables:          324 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      307628 kB
Committed_AS:      38124 kB
VmallocTotal:     765956 kB
VmallocUsed:        5412 kB
VmallocChunk:     753120 kB
HardwareCorrupted:     0 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       4096 kB
DirectMap4k:       12276 kB
DirectMap4M:      249856 kB

Freevps.sh

# wget freevps.us/downloads/bench.sh -O - -o /dev/null|bash
CPU model :  QEMU Virtual CPU version (cpu64-rhel6)
Number of cores : 1
CPU frequency :  3192.746 MHz
Total amount of ram : 248 MB
Total amount of swap : 175 MB
System uptime :   1 min,
Download speed from CacheFly: 25.4MB/s
Download speed from Linode, Atlanta GA: 13.2MB/s
Download speed from Linode, Dallas, TX: 7.45MB/s
Download speed from Linode, Tokyo, JP: 3.21MB/s
Download speed from Linode, London, UK: 8.15MB/s
Download speed from Leaseweb, Haarlem, NL: 6.73MB/s
Download speed from Softlayer, Singapore: 2.20MB/s
Download speed from Softlayer, Seattle, WA: 7.18MB/s
Download speed from Softlayer, San Jose, CA: 6.53MB/s
Download speed from Softlayer, Washington, DC: 71.8MB/s
I/O speed :  668 MB/s

Download Test

# wget  cachefly.cachefly.net/100mb.bin
--2012-08-15 05:48:58--  http://cachefly.cachefly.net/100mb.bin
Resolving cachefly.cachefly.net... 205.234.175.175
Connecting to cachefly.cachefly.net|205.234.175.175|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 104857600 (100M) [application/octet-stream]
Saving to: 100mb.bin

100%[===================================================================================================================>] 104,857,600 20.3M/s   in 4.6s

2012-08-15 05:49:03 (21.8 MB/s) - 100mb.bin

Comments

  • edited August 2012

    Inodes

    # df -i
    Filesystem            Inodes   IUsed   IFree IUse% Mounted on
    /dev/vda1             185472   28961  156511   16% /
    tmpfs                  31853       5   31848    1% /lib/init/rw
    udev                   30743     500   30243    2% /dev
    tmpfs                  31853       1   31852    1% /dev/shm
    

    Disk Space

    # df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/vda1             2.8G  1.8G  915M  67% /
    tmpfs                 125M     0  125M   0% /lib/init/rw
    udev                  121M  112K  120M   1% /dev
    tmpfs                 125M     0  125M   0% /dev/shm
    

    IOPING

    # dd if=/dev/zero of=iotest bs=64k count=16k conv=fdatasync && rm -rf iotest
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 1.4753 s, 728 MB/s
    
    # dd if=/dev/zero of=sb-io-test bs=1M count=1k conv=fdatasync
    1024+0 records in
    1024+0 records out
    1073741824 bytes (1.1 GB) copied, 1.56033 s, 688 MB/s
    
    # dd if=/dev/zero of=sb-io-test bs=64k count=16k conv=fdatasync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 1.54221 s, 696 MB/s
    
    # dd if=/dev/zero of=sb-io-test bs=1M count=1k oflag=dsync
    1024+0 records in
    1024+0 records out
    1073741824 bytes (1.1 GB) copied, 2.92811 s, 367 MB/s
    
    # dd if=/dev/zero of=sb-io-test bs=64k count=16k oflag=dsync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 10.3126 s, 104 MB/s
    
    **********************************
    dd (sequential disk speed test)...
    **********************************
    dd if=/dev/zero of=testfilex bs=64k count=16k conv=fdatasync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 2.04152 s, 526 MB/s
    
    ************************
    starting ioping tests...
    ***************************************************
    ioping disk I/O test (default 1MB working set)
    ***************************************************
    disk I/O: /dev/sd*
    ioping: stat "/dev/sd*" failed: No such file or directory
    
    **********************************************
    seek rate test (default 1MB working set)
    **********************************************
    seek rate: /dev/sd*
    ioping: stat "/dev/sd*" failed: No such file or directory
    
    **********************************************
    sequential test (default 1MB working set)
    **********************************************
    -----------------------
    sequential: /dev/sd*
    ioping: stat "/dev/sd*" failed: No such file or directory
    -----------------------
    sequential cached I/O: /dev/sd*
    ioping: stat "/dev/sd*" failed: No such file or directory
    
    # ioping . -c 5
    4096 bytes from . (ext3 /dev/disk/by-uuid/b0bda363-df61-4148-b009-d4cd8feab02f): request=1 time=0.1 ms
    4096 bytes from . (ext3 /dev/disk/by-uuid/b0bda363-df61-4148-b009-d4cd8feab02f): request=2 time=0.1 ms
    4096 bytes from . (ext3 /dev/disk/by-uuid/b0bda363-df61-4148-b009-d4cd8feab02f): request=3 time=0.1 ms
    4096 bytes from . (ext3 /dev/disk/by-uuid/b0bda363-df61-4148-b009-d4cd8feab02f): request=4 time=0.1 ms
    4096 bytes from . (ext3 /dev/disk/by-uuid/b0bda363-df61-4148-b009-d4cd8feab02f): request=5 time=0.1 ms
    
    --- . (ext3 /dev/disk/by-uuid/b0bda363-df61-4148-b009-d4cd8feab02f) ioping statistics ---
    5 requests completed in 4001.1 ms, 10183 iops, 39.8 mb/s
    min/avg/max/mdev = 0.1/0.1/0.1/0.0 ms
    
    # ioping . -R
    
    --- . (ext3 /dev/disk/by-uuid/b0bda363-df61-4148-b009-d4cd8feab02f) ioping statistics ---
    13996 requests completed in 3000.3 ms, 7547 iops, 29.5 mb/s
    min/avg/max/mdev = 0.0/0.1/8.0/0.5 ms
    

    Tracert and Ping

    
    # traceroute cachefly.cachefly.net
    traceroute to cachefly.cachefly.net (205.234.175.175), 30 hops max, 60 byte packets
     1  kvmny01.ssdvirt.com (108.61.35.73)  0.582 ms  0.965 ms  1.374 ms
     2  ethernet17-7-br1.pnj1.choopa.net (108.61.92.113)  0.244 ms  0.323 ms  0.321 ms
     3  ae7.ar2.nyc3.us.nlayer.net (69.31.34.77)  2.396 ms  2.395 ms  2.426 ms
     4  vlan-76.ar2.ewr1.us.nlayer.net (69.31.34.131)  5.061 ms  5.151 ms  2.781 ms
     5  vip1.G-anycast1.cachefly.net (205.234.175.175)  1.392 ms  1.610 ms  1.607 ms
    
    # ping -c 10 cachefly.cachefly.net
    PING cachefly.cachefly.net (205.234.175.175) 56(84) bytes of data.
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=1 ttl=59 time=1.82 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=2 ttl=59 time=1.95 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=3 ttl=59 time=1.79 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=4 ttl=59 time=1.42 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=5 ttl=59 time=1.49 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=6 ttl=59 time=1.46 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=7 ttl=59 time=1.77 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=8 ttl=59 time=1.68 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=9 ttl=59 time=1.97 ms
    64 bytes from vip1.G-anycast1.cachefly.net (205.234.175.175): icmp_req=10 ttl=59 time=1.58 ms
    
    --- cachefly.cachefly.net ping statistics ---
    10 packets transmitted, 10 received, 0% packet loss, time 9012ms
    rtt min/avg/max/mdev = 1.424/1.697/1.979/0.192 ms
    
    Thanked by 1serverbear
  • edited August 2012

    Benchmark still running

  • edited August 2012

    Before enabling virtio :

    # dd if=/dev/zero of=iotest bs=64k count=16k conv=fdatasync && rm -rf iotest
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 2.54526 s, 422 MB/s
    
    # dd if=/dev/zero of=sb-io-test bs=1M count=1k conv=fdatasync
    1024+0 records in
    1024+0 records out
    1073741824 bytes (1.1 GB) copied, 2.58242 s, 416 MB/s
    
    # dd if=/dev/zero of=sb-io-test bs=64k count=16k conv=fdatasync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 2.5926 s, 414 MB/s
    
    # dd if=/dev/zero of=sb-io-test bs=1M count=1k oflag=dsync
    1024+0 records in
    1024+0 records out
    1073741824 bytes (1.1 GB) copied, 3.69786 s, 290 MB/s
    
    # dd if=/dev/zero of=sb-io-test bs=64k count=16k oflag=dsync
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 13.8253 s, 77.7 MB/s
    
  • serverbearserverbear Member
    edited August 2012

    I actually picked up this deal too, here's my report: http://serverbear.com/benchmark/2012/08/12/TjvnpPGESa3sOUHm

    Just make sure you're using the Virtio drivers, I think it gets set to IDE automatically. Not sure how @John feels about making Virtio default.

    Link to offer - http://www.lowendtalk.com/discussion/4092/ssdvirt-ssd-vps-hosting-kvm-e3-cpus-1gbps-new-york#Item_16

  • I've mention it in the top of the post, but you can visit it here :

    http://www.ssdvirt.com/vps.html

  • johnjohn Member
    edited August 2012

    @serverbear, we have clients that use operating systems that do not support virtio by default. The default settings are to ensure maximum compatibility. I have added information to the initial setup email that clients should switch to virtio to get the best performance. I have also been manually checking VPSs a day or so after they are setup and sending a email to the client informing them about virtio.

    @Jack http://www.lowendtalk.com/discussion/comment/107506
    PM me and we can discuss a custom plan.

  • I Cant wait to see the results of mine:)

Sign In or Register to comment.