help with "proxmox", create VPS.

asrafeden

so i try to make VPS with my dedi.
i install proxmox and try to create vps.
so on "CD/DVD" i need to choose ISO image, but there is nothing there so i donwload and upload windows 2008.

next "Network", there i have problem ... :

some solution? upload something?

GM2015

Can't wait for your offers.

Awmusic12635

Put ISOs in:

/var/lib/vz/template/iso

or you can upload ISOs if you click on the storage and choose upload.

If you installed via the proxmox ISO it would have created one for you and shown up there. If you installed manually via debian then in the guide you followed there should have been a step to create the bridge in the interfaces file.

asrafeden

@Awmusic12635 said:
Put ISOs in:

/var/lib/vz/template/iso

or you can upload ISOs if you click on the storage and choose upload.

If you installed via the proxmox ISO it would have created one for you and shown up there. If you installed manually via debian then in the guide you followed there should have been a step to create the bridge in the interfaces file.

i use that:
https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy

miTgiB

asrafeden said: i use that: https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy

Since you have no bridge defined, what does it say in /etc/network/interfaces ? As for the ISO, you need to upload the ISO as @Awmusic12635 instructed

Awmusic12635

@asrafeden said:
https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy

In this section

Connect to the Proxmox VE web interface

Connect to the admin web interface (https://youripaddress:8006) and configure the vmbr0 and review all other settings, finally reboot to check if everything is running as expected.

Here is an example interfaces file:

auto lo
iface lo inet loopback
auto vmbr0
iface vmbr0 inet static
    address <ip address>
    netmask 255.255.255.0
    gateway <gateway ip>
    bridge_ports <port your server is connected at, often eth0>
    bridge_stp off
    bridge_fd 0

PieHasBeenEaten

Just use /dev/null in there everything will work!

century1stop

the "no network device " option