Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


1TB Harddrive decided to die
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

1TB Harddrive decided to die

So I've got this wonderful 1TB hardrive from 3 or 4 years ago and decided tonight to die. I made a little drama over the cespit some time ago with some questions and @anonx or somebody told me it'd die soon. He was right.

Before I rebooted my pc, I noticed all my usb automounted drives were umounted, so I rebooted. I could mount everything with your normal desktop gui clicks, but the damn 1TB drive just gave some stupid ntfs drive error of shutting down windows this and that.

So I mounted the drive as root in read only mode and wondering what else can I do other copying down ~300GB-500GB backups, isos and documents and such?

Is it worth reformatting? Can the reformatting save the drive or something?

«1

Comments

  • NixtrenNixtren Member
    edited October 2015

    Download a program like HD Sentinel to see if the drive can be saved or not:

    http://www.hdsentinel.com/

    Thanked by 2agentmishra GM2015
  • Thanks, it reports that there is nothing to with my drive, but the technical report doesn't mean a whole lot to me.

    here's the drive's snippet:

    -- Physical Disk Information - Disk: #1: WDC WD10JMVW-11S5XS1 --
    
       Hard Disk Summary
       -----------------
        Hard Disk Number. . . . . . . . . . . . . . . . .  1
        Hard Disk Device. . . . . . . . . . . . . . . . .  /dev/sdb
        Interface . . . . . . . . . . . . . . . . . . . .  Oxford/SAT USB/ATA
        Hard Disk Model ID. . . . . . . . . . . . . . . .  WDC WD10JMVW-11S5XS1
        Hard Disk Revision. . . . . . . . . . . . . . . .  01.01A01
        Hard Disk Serial Number . . . . . . . . . . . . .  WD-WXB1E92WUP63
        Hard Disk Total Size. . . . . . . . . . . . . . .  953838 MB
        Current Temperature . . . . . . . . . . . . . . .  41 ḞC (106 ḞF)
        Maximum Temperature (during Entire Lifespan). . .  60 ḞC (140 ḞF)
        Power On Time . . . . . . . . . . . . . . . . . .  208 days, 5 hours
        Estimated Remaining Lifetime. . . . . . . . . . .  more than 1000 days
        Health. . . . . . . . . . . . . . . . . . . . . .  ###################- 97 % (Excellent)
        Performance . . . . . . . . . . . . . . . . . . .  #################### 100 % (Excellent)
    
        There are 5 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
          No actions needed.
    
       ATA Information
       ---------------
        Hard Disk Cylinders . . . . . . . . . . . . . . .  1937956
        Hard Disk Heads . . . . . . . . . . . . . . . . .  16
        Hard Disk Sectors . . . . . . . . . . . . . . . .  63
        Total Sectors . . . . . . . . . . . . . . . . . .  1953459633
        ATA Revision. . . . . . . . . . . . . . . . . . .  7
        Bytes Per Sector. . . . . . . . . . . . . . . . .  512
        Buffer Size . . . . . . . . . . . . . . . . . . .  8192 KB
        Multiple Sectors. . . . . . . . . . . . . . . . .  16
        Error Correction Bytes. . . . . . . . . . . . . .  0
        Unformatted Capacity. . . . . . . . . . . . . . .  953838 MB
        Maximum PIO Mode. . . . . . . . . . . . . . . . .  1
        Active PIO Mode . . . . . . . . . . . . . . . . .  0
        Maximum Multiword DMA Mode. . . . . . . . . . . .  2
        Maximum UDMA Mode . . . . . . . . . . . . . . . .  150 MB/s (6)
        Active UDMA Mode. . . . . . . . . . . . . . . . .  150 MB/s (0)
        Minimum Multiword DMA Transfer Time . . . . . . .  120 ns
        Recommended Multiword DMA Transfer Time . . . . .  120 ns
        Minimum PIO Transfer Time Without IORDY . . . . .  120 ns
        Minimum PIO Transfer Time With IORDY. . . . . . .  120 ns
        ATA Control Byte. . . . . . . . . . . . . . . . .  Valid
        ATA Checksum Value. . . . . . . . . . . . . . . .  Valid
    
       Acoustic Management Configuration
       ---------------------------------
        Acoustic Management . . . . . . . . . . . . . . .  Not supported
        Acoustic Management . . . . . . . . . . . . . . .  Disabled
        Current Acoustic Level. . . . . . . . . . . . . .  Default (00h)
        Recommended Acoustic Level. . . . . . . . . . . .  Default (00h)
    
       EIDE Properties
       ---------------
        Read Ahead Buffer . . . . . . . . . . . . . . . .  Not supported
        DMA . . . . . . . . . . . . . . . . . . . . . . .  Supported
        Ultra DMA . . . . . . . . . . . . . . . . . . . .  Supported
        S.M.A.R.T.. . . . . . . . . . . . . . . . . . . .  Supported
        Power Management. . . . . . . . . . . . . . . . .  Supported
        Write Cache . . . . . . . . . . . . . . . . . . .  Supported
        Host Protected Area . . . . . . . . . . . . . . .  Not supported
        Advanced Power Management . . . . . . . . . . . .  Supported
        Power Up In Standby . . . . . . . . . . . . . . .  Not supported
        48-bit LBA Addressing . . . . . . . . . . . . . .  Supported
        Device Configuration Overlay. . . . . . . . . . .  Supported
        IORDY Support . . . . . . . . . . . . . . . . . .  Supported
        Read/Write DMA Queue. . . . . . . . . . . . . . .  Not supported
        NOP Command . . . . . . . . . . . . . . . . . . .  Supported
        Trusted Computing . . . . . . . . . . . . . . . .  Not supported
        64-bit World Wide ID. . . . . . . . . . . . . . .  0150E64EF4ADEFAF
        Streaming . . . . . . . . . . . . . . . . . . . .  Not supported
        Media Card Pass Through . . . . . . . . . . . . .  Not supported
        General Purpose Logging . . . . . . . . . . . . .  Supported
        Error Logging . . . . . . . . . . . . . . . . . .  Supported
        CFA Feature Set . . . . . . . . . . . . . . . . .  Not supported
        Long Physical Sectors (8) . . . . . . . . . . . .  Supported
        Long Logical Sectors. . . . . . . . . . . . . . .  Not supported
        Write-Read-Verify . . . . . . . . . . . . . . . .  Not supported
        NV Cache Feature. . . . . . . . . . . . . . . . .  Not supported
        NV Cache Power Mode . . . . . . . . . . . . . . .  Not supported
        NV Cache Size . . . . . . . . . . . . . . . . . .  Not supported
        Free-fall Control . . . . . . . . . . . . . . . .  Not supported
        Free-fall Control Sensitivity . . . . . . . . . .  Not supported
        Nominal Media Rotation Rate . . . . . . . . . . .  5400 RPM
    
       SSD Features
       ------------
        Data Set Management . . . . . . . . . . . . . . .  Not supported
        TRIM Command. . . . . . . . . . . . . . . . . . .  Not supported
        Deterministic Read After TRIM . . . . . . . . . .  Not supported
    
       S.M.A.R.T. Details
       ------------------
        Off-line Data Collection Status . . . . . . . . .  Never Started
        Self Test Execution Status. . . . . . . . . . . .  Successfully Completed
        Total Time To Complete Off-line Data Collection .  17760 seconds
        Execute Off-line Immediate. . . . . . . . . . . .  Supported
        Abort/restart Off-line By Host. . . . . . . . . .  Not supported
        Off-line Read Scanning. . . . . . . . . . . . . .  Supported
        Short Self-test . . . . . . . . . . . . . . . . .  Supported
        Extended Self-test. . . . . . . . . . . . . . . .  Supported
        Conveyance Self-test. . . . . . . . . . . . . . .  Supported
        Selective Self-Test . . . . . . . . . . . . . . .  Supported
        Save Data Before/After Power Saving Mode. . . . .  Supported
        Enable/Disable Attribute Autosave . . . . . . . .  Supported
        Error Logging Capability. . . . . . . . . . . . .  Supported
        Short Self-test Estimated Time. . . . . . . . . .  2 minutes
        Extended Self-test Estimated Time . . . . . . . .  193 minutes
        Conveyance Self-test Estimated Time . . . . . . .  5 minutes
    
       Security Mode
       -------------
        Security Mode . . . . . . . . . . . . . . . . . .  Supported
        Security Erase. . . . . . . . . . . . . . . . . .  Supported
        Security Erase Time . . . . . . . . . . . . . . .  163 minutes
        Security Enhanced Erase Feature . . . . . . . . .  Supported
        Security Enhanced Erase Time. . . . . . . . . . .  1 minutes
        Security Enabled. . . . . . . . . . . . . . . . .  No
        Security Locked . . . . . . . . . . . . . . . . .  No
        Security Frozen . . . . . . . . . . . . . . . . .  No
        Security Counter Expired. . . . . . . . . . . . .  No
        Security Level. . . . . . . . . . . . . . . . . .  High
    
       Serial ATA Features
       -------------------
        S-ATA Compliance. . . . . . . . . . . . . . . . .  Yes
        S-ATA I Signaling Speed (1.5 Gps) . . . . . . . .  Not supported
        S-ATA II Signaling Speed (3 Gps). . . . . . . . .  Supported
        Receipt Of Power Management Requests From Host. .  Supported
        PHY Event Counters. . . . . . . . . . . . . . . .  Supported
        Non-Zero Buffer Offsets In DMA Setup FIS. . . . .  Not supported
        DMA Setup Auto-Activate Optimization. . . . . . .  Supported, Disabled
        Device Initiating Interface Power Management. . .  Supported, Disabled
        In-Order Data Delivery. . . . . . . . . . . . . .  Not supported
        Asynchronous Notification . . . . . . . . . . . .  Not supported
        Software Settings Preservation. . . . . . . . . .  Supported, Disabled
        Native Command Queuing (NCQ). . . . . . . . . . .  Supported
        Queue Length. . . . . . . . . . . . . . . . . . .  32
    
       S.M.A.R.T.
       ----------
    No.  Attribute                Thre.. Value  Worst  Data                Status                   Flags                                                  
    1    Raw Read Error Rate      51     200    200    00000000012C        OK                       Self Preserving, Error-Rate, Performance, Statistica..
    3    Spin Up Time             21     180    170    0000000007C7        OK                       Self Preserving, Performance, Statistical, Critical
    4    Start/Stop Count         0      99     99     000000000712        OK (Always passing)      Self Preserving, Event Count, Statistical
    5    Reallocated Sectors Co.. 140    200    200    000000000000        OK                       Self Preserving, Event Count, Statistical, Critical
    7    Seek Error Rate          0      200    200    000000000000        OK (Always passing)      Self Preserving, Error-Rate, Performance, Statistical
    9    Power On Time Count      0      94     94     000000001385        OK (Always passing)      Self Preserving, Event Count, Statistical
    10   Spin Retry Count         0      100    100    000000000000        OK (Always passing)      Self Preserving, Event Count, Statistical
    11   Drive Calibration Retr.. 0      100    100    000000000000        OK (Always passing)      Self Preserving, Event Count, Statistical
    12   Drive Power Cycle Count  0      100    100    000000000195        OK (Always passing)      Self Preserving, Event Count, Statistical
    192  Power off Retract Cycl.. 0      200    200    0000000000F9        OK (Always passing)      Self Preserving, Event Count, Statistical
    193  Load/Unload Cycle Count  0      185    185    00000000B7B3        OK (Always passing)      Self Preserving, Event Count, Statistical
    194  Disk Temperature         0      106    87     000000000029        OK (Always passing)      Self Preserving, Statistical
    196  Reallocation Event Count 0      200    200    000000000000        OK (Always passing)      Self Preserving, Event Count, Statistical
    197  Current Pending Sector.. 0      200    200    000000000005        OK (Always passing)      Self Preserving, Event Count, Statistical
    198  Off-Line Uncorrectable.. 0      100    253    000000000000        OK (Always passing)      Self Preserving, Event Count
    199  Ultra ATA CRC Error Co.. 0      200    200    000000000000        OK (Always passing)      Self Preserving, Event Count, Statistical
    200  Write Error Rate         0      100    253    000000000000        OK (Always passing)      Error-Rate
    
    

    Nixtren said: Download a program like HD Sentinel to see if the drive can be saved or not:

  • GM2015 said: `Estimated Remaining Lifetime. . . . . . . . . . . more than 1000 days

    Health. . . . . . . . . . . . . . . . . . . . . . ###################- 97 % (Excellent)
    Performance . . . . . . . . . . . . . . . . . . . #################### 100 % (Excellent) `

    Looks fine as far as the SMART data goes, then. Probably NTFS got corrupt for some reason. Reformatting will fix this temporarily, but if the drive has a habit of returning bad data, it obviously can't be trusted with important things like backups.

    Thanked by 2GM2015 netomx
  • risharderisharde Patron Provider, Veteran

    Agreed but to be honest, never experienced ntfs corruption so I am more leaning to the side of age and possible malfunction which could happen again. I would use that as a sign to not put critical or important data on that drive unless you have backups

    @singsing said:
    Looks fine as far as the SMART data goes, then. Probably NTFS got corrupt for some reason. Reformatting will fix this temporarily, but if the drive has a habit of returning bad data, it obviously can't be trusted with important things like backups.

    Thanked by 1GM2015
  • Now I remember, it was giving me trouble when I wanted to remove a subparent folder of certain files and the folder couldn't be opened from gui since windows was giving me corruption errors. I got around that with multiple robocopy retries and command line, but it was a sign of serious fuck.

    risharde said: Agreed but to be honest, never experienced ntfs corruption so I am more leaning to the side of age and possible malfunction which could happen again. I would use that as a sign to not put critical or important data on that drive unless you have backups

  • It was not giving me this error while already running debian, it just started yesterday.

    Error mounting /dev/sdb1 at /media/myuser/My Passport: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb1" "/media/myuser/My Passport"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
    Metadata kept in Windows cache, refused to mount.
    Failed to mount '/dev/sdb1': Operation not permitted
    The NTFS partition is in an unsafe state. Please resume and shutdown
    Windows fully (no hibernation or fast restarting), or mount the volume
    read-only with the 'ro' mount option.
    
  • I would try and reformat :) I know nothing about HDDs, but I did that to one of my old HDDs,too, to get it to work again. Eventually it even stopped having errors :D

    Thanked by 1GM2015
  • Based on this http://askubuntu.com/questions/145902/unable-to-mount-windows-ntfs-filesystem-due-to-hibernation I'll try to run qemu, install windows, boot windows, mount the drive in the vm and shut down the vm.

    "Boot into Windows and power down the system by shutting it down completely. You may then boot back into Ubuntu and the partition will mount in read-write mode automatically when you open it in Nautilus. Note that the "Shut Down" option may not be the one displayed in your start menu by default. You may need to click the button next to it to see further options."

    4n0nx said: I would try and reformat :) I know nothing about HDDs, but I did that to one of my old HDDs,too, to get it to work again. Eventually it even stopped having errors :D

  • GM2015 said: Based on this http://askubuntu.com/questions/145902/unable-to-mount-windows-ntfs-filesystem-due-to-hibernation I'll try to run qemu, install windows, boot windows, mount the drive in the vm and shut down the vm.

    If you corrupted your NTFS by mounting it read/write under Linux from a state that wasn't cleanly unmounted from Windows, due to hibernation rather than shutdown, then it's probably hosed now. There's a chance Windows can fix it, but I'd say if you care at all about your data, you should be making a dd clone of the hard disk before trying to rescue it.

    Thanked by 1GM2015
  • GM2015GM2015 Member
    edited October 2015

    I don't enough space or time for that. I didn't really expect this drive to die. The stupid ntfs debian error persisted after rebooting again. All other usb drives mount normally.

    Never ran qemu formerly, now I'm writing a windows xp linux iso to a qcow image. QMoo. Maybe that'll work or not.

    singsing said: If you corrupted your NTFS by mounting it read/write under Linux from a state that wasn't cleanly unmounted from Windows, due to hibernation rather than shutdown, then it's probably hosed now. There's a chance Windows can fix it, but I'd say if you care at all about your data, you should be making a dd clone of the hard disk before trying to rescue it.

  • GM2015GM2015 Member
    edited October 2015

    I was downloading a new debian iso and someone must have hijacked my download.
    image

    GM2015 said: windows xp linux iso

    Thanked by 1netomx
  • singsingsingsing Member
    edited October 2015

    GM2015 said: I don't enough space or time for that.

    At least use qemu's -snapshot option to avoid modifying your disk for real the first time you try to let windows repair it and do it again if everything appears OK.

    Actually, if I remember correctly, you can even commit changes stashed away by -snapshot using the qemu monitor.

    Thanked by 1GM2015
  • i'M JUst installing the linux iso with cli commands. No idea about any gui tools for qemu.

    singsing said: At least use qemu's -snapshot option to avoid modifying your disk for real the first time you try to let windows repair it and do it again if everything appears OK.

    Actually, if I remember correctly, you can even commit changes stashed away by -snapshot using the qemu monitor.

  • GM2015 said: i'M JUst installing the linux iso with cli commands. No idea about any gui tools for qemu.

    Now I'm confused, I thought you wanted to run -Windows- in QEMU to fix your NTFS partition.

    Anyways, how to get to the monitor, either in SDL or in curses mode is explained here:

    http://stackoverflow.com/questions/14165158/how-to-switch-to-qemu-monitor-console-when-running-with-curses

    Once in the monitor, the command is commit to write back cached snapshot changes:

    https://en.wikibooks.org/wiki/QEMU/Monitor#commit

    Thanked by 1GM2015
  • Of course it's windows, but on a new linux iso made by aliens. I'm trying to be a good Merican citizen with using euphemisms while not being one.

    singsing said: Now I'm confused, I thought you wanted to run -Windows- in QEMU to fix your NTFS partition.

    Anyways, how to get to the monitor, either in SDL or in curses mode is explained here:

    http://stackoverflow.com/questions/14165158/how-to-switch-to-qemu-monitor-console-when-running-with-curses

    Once in the monitor, the command is commit to write back cached snapshot changes:

    https://en.wikibooks.org/wiki/QEMU/Monitor#commit

  • @GM2015

    drive is fine but get it replaced asap when you start getting weak sectors you know it's time, it's also one of the big 5 bad errors.

    Thanked by 1GM2015
  • any recommendations where to get 2 new disks for less than £100?

    I've spent £100-£120 on this 1TB drive at argos and it was already a ripoff at the time.

    TarZZ92 said: drive is fine but get it replaced asap when you start getting weak sectors you know it's time, it's also one of the big 5 bad errors.

  • TarZZ92TarZZ92 Member
    edited October 2015

    GM2015 said: any recommendations where to get 2 new disks for less than £100?

    I've spent £100-£120 on this 1TB drive at argos and it was already a ripoff at the time.

    Firstly avoid argos it's a huge ripoff.

    and i got a few of these http://www.ebay.co.uk/itm/2TB-3-5-Inch-SATA-WD-RE4-GP-7200RPM-64MB-Cache-Desktop-Internal-Hard-Drive-/331134588445?hash=item4d1928d61d

    For portable http://www.ebay.co.uk/itm/Toshiba-1TB-Canvio-Basics-USB-3-0-2-5-Portable-External-Hard-Drive-Matte-Black-/331322396519?hash=item4d245a8f67

    Thanked by 1GM2015
  • IkoulaIkoula Member, Host Rep

    Maybe i am to paranoid but i would not trust it anymore and would replace it.

    Even if the surface is clean there are other parts in a mechanical hard drive that may not work properly (controller, head, ...)

    The thing is it will surely not get better so if i were you i would copy everthing while i still can and trash the disk.

    If you want to make more diagnostics i recommend you to get manufacturer tools, oh and check warranty if you're lucky you might get a new one or at least a refurbished one (some hard drives has a five years warranty).

    Thanked by 1GM2015
  • Don't power cycle it so much?

    Thanked by 1GM2015
  • Buy a new disk. It's 3 to 4 years old already so if it's not dead yet it will be soon.

    Thanked by 1GM2015
  • It's used in my laptop which is my only pc at home, except for the raspberry pi2, so it's actively used.

    linuxthefish said: Don't power cycle it so much?

    Some of these drive seem great, even if it's a "paid"/"affiliate" review:
    http://www.techradar.com/news/computing-components/storage/external-hard-drive-1292181
    Especially their number 1:
    http://www.amazon.co.uk/Seagate-Expansion-desktop-external-drive/dp/B0084LZI5Y/

    I don't why but I remember people bashing seagate drives.

    sc754 said: Buy a new disk. It's 3 to 4 years old already so if it's not dead yet it will be soon.

  • GM2015 said: I don't why but I remember people bashing seagate drives.

    they are unreliable (especially the made in china ones) but 4TB is very reliable.

    Thanked by 1GM2015
  • @sc754 said:
    Buy a new disk. It's 3 to 4 years old already so if it's not dead yet it will be soon.

    I have a 10 years 320GB Seagate HDD, a 8 years 160GB Maxtor HDD and a 6 years 1TB Hitachi HDD on my desktop. They all are Sata 2 and are working without one single problem...

    Thanked by 1GM2015
  • GM2015GM2015 Member
    edited October 2015

    I just plugged the drive into my cousin's windows laptop, booted the laptop, the drive worked, rebooted the laptop, the drive was writeable and turned her laptop off.

    Then I plugged it back into debian after a reboot and it's now working again. No idea what caused to discover that error message I pasted above.
    http://askubuntu.com/questions/290630/problem-to-enter-in-ntfs-partition-the-disk-contains-an-unclean-file-system

  • @GM2015 said:
    I just plugged the drive into my cousin's windows laptop, booted the laptop, the drive worked, rebooted the laptop, the drive was writeable and turned her laptop off.

    Then I plugged it back into debian after a reboot and it's now working again. No idea what caused to discover that error message I pasted above.
    http://askubuntu.com/questions/290630/problem-to-enter-in-ntfs-partition-the-disk-contains-an-unclean-file-system

    Use a proper file system if you are running Debian, I bet you wouldn't see issues with ext4.

    Thanked by 1GM2015
  • GM2015GM2015 Member
    edited October 2015

    Can winblows read ext4? (yes, just learned to google) I used to use this drive in my own window laptop and with helping out others with backups too if I needed to.

    linuxthefish said: Use a proper file system if you are running Debian, I bet you wouldn't see issues with ext4.

  • GM2015 said: Can winblows read ext4?

    Stick with NTFS then, and make sure you fully "eject" or unmount the disk before removing power!

    Thanked by 1GM2015
  • Sure boss, just not always possible when your laptop freezes or crashes into the blue mysteries of death.

    linuxthefish said: Stick with NTFS then, and make sure you fully "eject" or unmount the disk before removing power!

  • I got myself this drive 1tb for £39.84 http://www.amazon.co.uk/gp/product/B00KWHJY7Q with nus 5% discount. Man, I wish I used my nus discount when I bought £200-£300 worth of crap on amazon in July.

Sign In or Register to comment.