Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Categories

In this Discussion

› › Contabo says Hello from Singapore! - Page 3
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Contabo says Hello from Singapore!

135

Comments

  • derekyangderekyang Member

    @dgc1980 said:

    Single Core | 549
    Multi Core | 1716
    Full Test | https://browser.geekbench.com/v5/cpu/7539841

    It's a joke, but believe it's having heavy load right now which impact the result.

  • dev_vpsdev_vps Member

    @derekyang said:

    @dgc1980 said:

    Single Core | 549
    Multi Core | 1716
    Full Test | https://browser.geekbench.com/v5/cpu/7539841

    It's a joke, but believe it's having heavy load right now which impact the result.

    If AMD EPYC 7282 cpu core was 100% dedicated, then single core geekbench should be around 900-950

  • youandriyouandri Member

    @kuerisu said:
    In Ubuntu 20.04:
    Uncomment IPv6 part of /etc/netplan/01-netcfg.yaml
    Comment out last line of /etc/sysctl.conf
    Then reboot.
    IPv6 will work.

    Do you give a example?

    :)

  • NanoG6NanoG6 Member

    @dev_vps said:

    @derekyang said:

    @dgc1980 said:

    Single Core | 549
    Multi Core | 1716
    Full Test | https://browser.geekbench.com/v5/cpu/7539841

    It's a joke, but believe it's having heavy load right now which impact the result.

    If AMD EPYC 7282 cpu core was 100% dedicated, then single core geekbench should be around 900-950

    Currently installing APISCP, and CPU steal is ~27. I hope it's just because folks is doing bench right now..

  • scookescooke Member

    Can I install a UCS ISO?

  • skorupionskorupion Member, Host Rep

    @dev_vps said:

    @derekyang said:

    @dgc1980 said:

    Single Core | 549
    Multi Core | 1716
    Full Test | https://browser.geekbench.com/v5/cpu/7539841

    It's a joke, but believe it's having heavy load right now which impact the result.

    If AMD EPYC 7282 cpu core was 100% dedicated, then single core geekbench should be around 900-950

    Don't forget that everyone is running yabs rn.

  • CoffeeCoffee Member

    @NanoG6 said: CPU steal is ~27

    How about your network speed?

    Mine is awesome, 1-2 Mbps from other SG DC :sunglasses:

  • Edward_SEdward_S Member

    @Coffee said:

    @NanoG6 said: CPU steal is ~27

    How about your network speed?

    Mine is awesome, 1-2 Mbps from other SG DC :sunglasses:

    :D

  • NanoG6NanoG6 Member

    @Coffee said:

    @NanoG6 said: CPU steal is ~27

    How about your network speed?

    Mine is awesome, 1-2 Mbps from other SG DC :sunglasses:

       Speedtest by Ookla

     Server: PT FirstMedia - Singapore (id = 7556)
        ISP: 
    Latency:     0.88 ms   (0.78 ms jitter)
   Download:   119.82 Mbps (data used: 182.7 MB)                               
     Upload:    89.22 Mbps (data used: 147.9 MB)                               
Packet Loss:     0.0%
 Result URL: https://www.speedtest.net/result/c/14e22511-6797-4653-8c3a-8d3e5154d427
  • JetF0xJetF0x Member

    @dgc1980 said:
    routing in Australia is a little hit and miss.

    myself using Superloop (Megaport) have a 90ms ping to the server that is quiet reasonable,
    a friend using a TPG based link starts getting 200ms+ via HE in Sydney?? with a round trip of over 250ms, 200ms within Australia is a joke, you may as well host in USA
    my mobile using Telstra routes via Japan before getting to SG making it a 400ms round trip, I will see if I can find a friend using a Telstra retail link at their house rather than a mobile link to see if there is much difference, but I doubt that.

    I have not been able to configure IPv6 either like others, they pointed me to the blog page, but that does nothing.

    hopefully I can have some more information tomorrow, but I will dump a YABS..

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2020-12-29                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Thu 22 Apr 2021 08:31:28 PM AEST

Basic System Information:
---------------------------------
Processor  : AMD EPYC 7282 16-Core Processor
CPU cores  : 6 @ 2794.748 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM        : 15.6 GiB
Swap       : 2.0 GiB
Disk       : 392.7 GiB

fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 5.26 MB/s     (1.3k) | 63.76 MB/s     (996)
Write      | 5.29 MB/s     (1.3k) | 64.18 MB/s    (1.0k)
Total      | 10.55 MB/s    (2.6k) | 127.95 MB/s   (1.9k)
           |                      |
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 127.48 MB/s    (249) | 98.49 MB/s      (96)
Write      | 134.26 MB/s    (262) | 105.05 MB/s    (102)
Total      | 261.75 MB/s    (511) | 203.54 MB/s    (198)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed
                |                           |                 |
Clouvider       | London, UK (10G)          | 259 Mbits/sec   | 190 Mbits/sec
Online.net      | Paris, FR (10G)           | 237 Mbits/sec   | 122 Mbits/sec
WorldStream     | The Netherlands (10G)     | 180 Mbits/sec   | 225 Mbits/sec
Biznet          | Jakarta, Indonesia (1G)   | 274 Mbits/sec   | 269 Mbits/sec
Clouvider       | NYC, NY, US (10G)         | 158 Mbits/sec   | 177 Mbits/sec
Velocity Online | Tallahassee, FL, US (10G) | 166 Mbits/sec   | 113 Mbits/sec
Clouvider       | Los Angeles, CA, US (10G) | 213 Mbits/sec   | 153 Mbits/sec
Iveloz Telecom  | Sao Paulo, BR (2G)        | busy            | busy

Geekbench 5 Benchmark Test:
---------------------------------
Test            | Value
                |
Single Core     | 549
Multi Core      | 1716
Full Test       | https://browser.geekbench.com/v5/cpu/7539841

    I find their disk speed slow for what they advertise.

    Telstra has around 400+ ping at home use to singapore...

  • skorupionskorupion Member, Host Rep

    @dgc1980 said: I find their disk speed slow for what they advertise.

    Email them to get your speeds unlocked to 600 + mbps

  • coelhofamintocoelhofaminto Member

    contabo wont accept crypto currency as payment method :( unfortunately this is a big no no for me...

    if it was a grocery store I would understand but in 2021, a hosting company not accepting crypto I think is just not up to the game

  • WilliamWilliam Member
    edited April 2021

    @coelhofaminto said: if it was a grocery store I would understand but in 2021, a hosting company not accepting crypto I think is just not up to the game

    Its hard to do as German company. Taxation is horrible, if the value of the coin changes after sale (but before you sell it) your invoice is now invalid (and writing it was a crime) etc. etc.

    Thanked by 3coelhofaminto lentro Ympker
  • jsgjsg Member, Resident Benchmarker

    FWIW: I just looked at the last result sets (from today) and find only a quite small decrease in SSD speed.
    And it's still a quite nice and fast disk (for a SSD).

    As for processor and mem those seem to be in the predicted range (about 15% slower than on an largely empty node).
    But I only looked at the most recent 3 benchmark results which IMO is not terribly reliable (although still better than a one shot yabs or similiar).

    All of the above re. the VPS.

  • dgc1980dgc1980 Member

    IPv6 has been fixed while I was sleeping, and for myself the ping is still 90ms for that, so that is good.

  • FritzFritz Veteran

    The price is great, but the network is unoptimized.

  • someshzsomeshz Member, Host Rep
    edited April 2021

    @go626201 said:
    @contabo_m
    Hi,Is that possible to request a routing optimization?
    My traceroute seems like it didn't have the shortest optimized routing connection.
    Telekom Malaysia(AS4788) to Contabo Asia(AS141995)
    Normally my isp to singapore only get about 8ms-50ms(By Equinix SG get about 10ms)

    I am getting better routing for my France located server than contabo's SG VM. As they are in starting phase they might work on this in the future. Although, glad to see @contabo_m is expanding so fast.

  • mijoramijora Member

    i am in singapore on viewquest fiber which has the best routing in singapore of every isp. my connection goes to hong kong, then to the US, then back to singapore via he.net to get to contabo singapore. 170ms. crazy. why no local peering?

  • pierrepierre Member
    edited April 2021

    It's a new location, they'll ofc have some issues here and there, but pricing is great compared to other companies from there.

    Even though OVH offers dedicated servers in Singapore, I still haven't found a reliable and stable host offering Singapore as a location.

    Good shit Contabo, cheers to the next years/locations.

    Note: I bet they'll start offering DDoS Protection in the next couple weeks or months.

  • pierrepierre Member

    @gemuruhco said:
    Wow. they're using EPYC 2019. but still worth . :smile:

    Come on, 2nd gen EPYC is still amazing and pretty much flawless. They'll probably bring 3rd gen once they come readily available.

    For the price they offer, I'd still be happy with Xeon E5's.

  • jsgjsg Member, Resident Benchmarker

    @Fritz said:
    The price is great, but the network is unoptimized.

    Hey, we are talking about a brand spanking new location. Give them some time. plus

    • they already did optimize some important routes - within a few days, well noted.
    • they are listening. That's something one doesn't get, at least not easily, from many providers. That's a solid basis.

    I bet, for example, that @mijora's problem will be looked at. Btw. what he experiences is a typical problem with carriers; they tend to route everything via their main hubs (like e.g. Seattle) unless someone looks at a given source-target pair and makes an effort to find and configure a better route.

  • caracalcaracal Member
    edited April 2021

    @mijora said:
    i am in singapore on viewquest fiber which has the best routing in singapore of every isp. my connection goes to hong kong, then to the US, then back to singapore via he.net to get to contabo singapore. 170ms. crazy. why no local peering?

    Fwiw myrepublic gives me 6ms with 4 hops

  • pierrepierre Member

    @jsg said:

    • they are listening. That's something one doesn't get, at least not easily, from many providers. That's a solid basis.

    Contabo is a company that cares about the community, they listen to everyone, customers or not.

  • go626201go626201 Member

    @mijora said:
    i am in singapore on viewquest fiber which has the best routing in singapore of every isp. my connection goes to hong kong, then to the US, then back to singapore via he.net to get to contabo singapore. 170ms. crazy. why no local peering?

    Same with yours,My ISP-TM also route to HK and back to Contabo SG.

  • WilliamWilliam Member

    @go626201 said: Same with yours,My ISP-TM also route to HK and back to Contabo SG.

    Welcome to HE Asia. This is the same since nearly 10 years now.

    Thanked by 1jsg
  • sentarumsentarum Member

    13 ms from West Borneo - Indonesia :)

  • OhJohnOhJohn Member
    edited April 2021

    From the sg ovh dc I reach the contabo.switch2.sin2.he.net at ~ 2 ms, then one more hop to the test ip 103.164.55.92 is plus 160 ms.... :confused:

  • go626201go626201 Member

    @OhJohn said:
    From the sg ovh dc I reach the contabo.switch2.sin2.he.net at ~ 2 ms, then one more hop to the test ip 103.164.55.92 is plus 160 ms.... :confused:

    Try ping 103.164.55.X other ip,seems like only 92 having abnormal result.

    Thanked by 1OhJohn
  • OhJohnOhJohn Member
    edited April 2021

    Hm, while this sounds like a good idea, the ones i found show the same behaviour... 2ms to the he switch and then another 160ms in the last hop...

    Edit: now i found a good one, but still: three at 160ms, one at 2ms (out of four).

  • shehankashehanka Member
    edited April 2021

    I bought one and the speeds are horrendous to be honest.

    link : https://ibb.co/HHzN8cT

Sign In or Register to comment.