Routing / Networking issue? What is causing this?

LateForACronJob

as usual having trouble with my hostsolutions box.

any ideas what could be causing this?

here's my "i have no idea what i'm doing so let's test everything" results:

iperf -c redacted -d -P 4
TCP window size: 85.0 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-10.1 sec  1.00 MBytes   829 Kbits/sec
[  8]  0.0-10.2 sec  1.38 MBytes  1.13 Mbits/sec
[  6]  0.0-10.3 sec  1.50 MBytes  1.22 Mbits/sec
[  3]  0.0-11.1 sec  1.12 MBytes   849 Kbits/sec
[SUM]  0.0-11.1 sec  5.00 MBytes  3.77 Mbits/sec

     nench.sh v2019.07.20 -- https://git.io/nench.sh

    Processor:    Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz
    CPU cores:    2
    Frequency:    1795.745 MHz
     RAM:          4.0G
    Swap:         128M
     Kernel:       Linux 2.6.32-48-pve x86_64

    CPU: SHA256-hashing 500 MB
    6.956 seconds
     CPU: bzip2-compressing 500 MB
    10.446 seconds
     CPU: AES-encrypting 500 MB
    2.996 seconds

    ioping: seek rate
     min/avg/max/mdev = 126.1 us / 292.3 us / 62.4 ms / 1.29 ms
    ioping: sequential read speed
     generated 3.84 k requests in 5.00 s, 959.5 MiB, 767 iops, 191.9 MiB/s

    dd: sequential write speed
    1st run:    158.31 MiB/s
    2nd run:    162.12 MiB/s
    3rd run:    159.26 MiB/s
    average:    159.90 MiB/s

     IPv4 speedtests
    your IPv4:    redacted

    Cachefly CDN:         18.81 MiB/s
    Leaseweb (NL):        1.58 MiB/s
    Softlayer DAL (US):   1.54 MiB/s
    Online.net (FR):      4.39 MiB/s
    OVH BHS (CA):         1.92 MiB/s

     No IPv6 connectivity detected

LateForACronJob

is this Europe's fault because i'm happy to blame Europe for everything

SirFoxy

@LateForACronJob said:
is this Europe's fault because i'm happy to blame Europe for everything

It is

rm_

LateForACronJob said: as usual having trouble with my hostsolutions box.

any ideas what could be causing this?

here's my "i have no idea what i'm doing so let's test everything" results:

You didn't even say what the trouble is. If your "redacted" iperf IP is in Bangladesh it's going to have slow speeds to it, no two ways about it. Aside from that, the speedtest shows it just has a mediocre network overall. But then again since you didn't mention what is the trouble, maybe you meant something else entirely, such as why such ancient kernel version, or why it's only 1795.745 MHz and not 1.80GHz, or why No IPv6 connectivity detected.

FHR

rm_ said: No IPv6 connectivity detected

That's the real issue

cociu

we know about this issue and we work in this , we will fix it in maximum 48 hours. We need to change something in our router core.

LateForACronJob

@cociu said:
we know about this issue and we work in this , we will fix it in maximum 48 hours. We need to change something in our router core.

i think u made it worse bro