Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


IPv6 Only | VPS 2GB Ram
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

IPv6 Only | VPS 2GB Ram

I am looking for a yearly VPS with ipv6 only no need for ipv4 2GB ram 2 Core CPU (fairshare) and 50GB of SSD. I would need a kernel that supported fuse to mount virtual drives. Looking to spend 20-25/y

Comments

  • Perhaps @HostDoc or @mikho can help with this?

    Thanked by 2mikho HostDoc
  • mikhomikho Member, Host Rep
    edited February 2019

    Location?
    OpenVZ or KVM?

  • @mikho any location and I am fine with OpenVZ as long as the kernel has fuse enabled

  • mikhomikho Member, Host Rep

    @Reaperofpower said:
    @mikho any location and I am fine with OpenVZ as long as the kernel has fuse enabled

    I have room in Perth, Australia.
    Let me check if I can create an ipv6 only vps on it. I know Solus has some problems with it, lets hope Virtualizor solved it. ;)

  • @mikho said:

    @Reaperofpower said:
    @mikho any location and I am fine with OpenVZ as long as the kernel has fuse enabled

    I have room in Perth, Australia.
    Let me check if I can create an ipv6 only vps on it. I know Solus has some problems with it, lets hope Virtualizor solved it. ;)

    Fwiw I have an IPv6 only KVM that's been set up with Virtualizor and its working fine, can't say I've ever used Solus with v6 only though..

  • @Reaperofpower I can only do this in USA and I have KVM.

    I can do:
    1vCore
    2GB RAM
    50GB NVMe SSD
    /64 IPv4 at 10gbps

    £18/y

  • @HostDoc said:
    /64 IPv4 at 10gbps

  • @HostDoc said:
    @Reaperofpower I can only do this in USA and I have KVM.

    I can do:
    1vCore
    2GB RAM
    50GB NVMe SSD
    /64 IPv4 at 10gbps

    £18/y

    bait and switch?! I want compensation

  • @Jake4 said:

    @HostDoc said:
    /64 IPv4 at 10gbps

    @smile said:

    @HostDoc said:
    @Reaperofpower I can only do this in USA and I have KVM.

    I can do:
    1vCore
    2GB RAM
    50GB NVMe SSD
    /64 IPv4 at 10gbps

    £18/y

    bait and switch?! I want compensation

    After a while, you get so used to typing IPv4, you totally forget when context is in relation to IPv6.
    As I am sure the majority would have seen past the mistake and understood what was meant, I'll chalk this down to human error.

    Thanked by 1ehab
  • AnthonySmithAnthonySmith Member, Patron Provider

    would a /64 of ssd be ok?

  • @HostDoc said:
    @Reaperofpower I can only do this in USA and I have KVM.

    I can do:
    1vCore
    2GB RAM
    50GB NVMe SSD
    /64 IPv4 at 10gbps

    £18/y

    How much to add 1 more core?

  • mikhomikho Member, Host Rep

    openVZ IPv6 only ...
    I could do NAT Ipv4 if you want to.

    2GB ram 2 Core CPU (fairshare) and 50GB SSD in Perth, Australia

    $25/year.
    If you want to go ahead, I'll create the order link.

  • I can add an additional core for £0.28/m so £3.36 annually.

  • Lol a /64 of v4, I never caught that either. What's the bandwidth cap on those 2 offers?

  • mikhomikho Member, Host Rep
    edited February 2019

    @dahartigan said:
    Lol a /64 of v4, I never caught that either. What's the bandwidth cap on those 2 offers?

    From me, 1TB then the usual treatment as all other of my offers. .

    Thanked by 1dahartigan
  • @dahartigan said:
    Lol a /64 of v4, I never caught that either. What's the bandwidth cap on those 2 offers?

    well you're going to need to buy at least two in order to have a functional address...

    Thanked by 1dahartigan
  • @dahartigan said:
    Lol a /64 of v4, I never caught that either. What's the bandwidth cap on those 2 offers?

    Sorry mate, totally missed this. The BW cap would be 1TB.

    Thanked by 1dahartigan
  • @mikho said:

    @Reaperofpower said:
    @mikho any location and I am fine with OpenVZ as long as the kernel has fuse enabled

    I have room in Perth, Australia.
    Let me check if I can create an ipv6 only vps on it. I know Solus has some problems with it, lets hope Virtualizor solved it. ;)

    We support IPv6 only VMs.
    Infact we support VMs with only internal IPs as well.

  • mikhomikho Member, Host Rep

    @virtualizor said:

    @mikho said:

    @Reaperofpower said:
    @mikho any location and I am fine with OpenVZ as long as the kernel has fuse enabled

    I have room in Perth, Australia.
    Let me check if I can create an ipv6 only vps on it. I know Solus has some problems with it, lets hope Virtualizor solved it. ;)

    We support IPv6 only VMs.
    Infact we support VMs with only internal IPs as well.

    I know :) basicly I run all my NAT vps business with that setup, with a pinch of secret sauce .....

    I’ve been pestering your support about a couple of OpenVZ7 questions, which you have solved, so far a happy customer of you.

  • @mikho said:

    I’ve been pestering your support about a couple of OpenVZ7 questions, which you have solved, so far a happy customer of you.

    A new version is also underway with a lot of fixes and features.

    Thanked by 1mikho
Sign In or Register to comment.