Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


No network after kvm Windows installation on Hetzner
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

No network after kvm Windows installation on Hetzner

Anyone knows how to activate network?
Thanks!

Comments

  • Did you configure the gateway IP?

  • KuJoeKuJoe Member, Host Rep

    Please provide more details about your issue. Based on your post it could be almost anything. Is your server powered on? Is the NIC enabled? Did you configure the NIC correctly?

  • Not sure about the reason but I used another img and it works now! Thanks!

  • CrossBoxCrossBox Member, Patron Provider
    edited January 2018

    You need to use routed instead of the bridged mode:

    Owing to Hetzner network configuration (IPs are only routed on and by the MAC address of the dedicated server) a standard bridged setup is not possible as the VMs have an own MAC address and so are not allowed to communicate with the Hetzner network. Therefore, a so-called 'routed setup' is necessary.

    https://wiki.hetzner.de/index.php/KVM_mit_libvirt/en

    And then on your Windows VPS you need to manually set IP address, net mask and gateway:

    Subnet mask should be 255.255.255.0 and you must also specify gateway which is actually a broadcasting IP of your hypervisor.

Sign In or Register to comment.