All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
ifconfig setup centos 7 Can't figure out why Address not pingable
My ifconfig interface setup is like this.
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="static"
DEFROUTE="yes"
NM_CONTROLLED=no
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="enp6s0f0"
UUID="98fe6b86-15b9-482d-a16a-bd2fa37c0b81"
DEVICE="enp6s0f0"
ONBOOT="yes"
IPV6_PRIVACY="no"
IPADDR="104.247.204.1*6"
PREFIX="29"
GATEWAY="104.247.204.1*5"
DNS1="8.8.8.8"
DHCP_CLIENT_ID="secure.jbmserv.com"
DNS2="8.8.4.4"
But when I try to ping a secondary IP thought putty it gives me.
However, if I try to ping from command prompt at home, it gives me no result.
PING 104.247.204.17 (104.247.204.17) 56(84) bytes of data.
From 104.247.204.1*6 icmp_seq=1 Destination Host Unreachable
From 104.247.204.1*6 icmp_seq=2 Destination Host Unreachable
From 104.247.204.1*6 icmp_seq=3 Destination Host Unreachable
From 104.247.204.1*6 icmp_seq=4 Destination Host Unreachable
From 104.247.204.1*6 icmp_seq=5 Destination Host Unreachable
From 104.247.204.1*6 icmp_seq=6 Destination Host Unreachable
From 104.247.204.1*6 icmp_seq=7 Destination Host Unreachable
From 104.247.204.1*6 icmp_seq=8 Destination Host Unreachable
Comments
Can you ping the gateway from the server?