Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


smartctl output
New on LowEndTalk? Please Register and read our Community Rules.

smartctl output

deadbeefdeadbeef Member
edited April 2017 in Help

Need I worry or is it some incompat from the software?

iostat:

Comments

  • Tagging obscure OS fan @WWS

  • WSSWSS Member

    @deadbeef Solaris is hardly obscure, you scum.

    This is likely running under SmartOS (looks like it), and no, there's no direct drive SMART access under that OS with the SCSI emulation layer AFAIK.

    Thanked by 2deadbeef Nekki
  • The wizard has spoken, thread can be closed.

    Thank you @WSS !

  • WSSWSS Member

    Welp... with that SECOND screenshot..

    I'd say there's a problem. Could be OS or hardware. Really looks like hardware.

    Thanked by 1deadbeef
  • @WSS said:
    Welp... with that SECOND screenshot..

    I'd say there's a problem. Could be OS or hardware. Really looks like hardware.

    What points you to that on the second screenshot? Or are you just pulling my leg? :)

  • Oh, the hard errors? I assume that's a bad value then?

  • WSSWSS Member

    I've never had errors in SmartOS, but I assume there is enough of a Solaris base that this is either a corrupt filesystem, or a dying drive. Solaris/x86 was always a joke, but I miss it these days.

    Thanked by 1deadbeef
  • WSSWSS Member

    If it isn't headless, I'd boot from CD and do a fsck on it. If you've only got ssh into it, consider fsck -F ufs /dev/rdsk/c3t1d0s0

    Thanked by 1deadbeef
  • deadbeefdeadbeef Member
    edited April 2017

    @WSS said:
    If it isn't headless, I'd boot from CD and do a fsck on it. If you've only got ssh into it, consider fsck -F ufs /dev/rdsk/c3t1d0s0

    Thank you, just did and I suppose it doesn't look good.

    What is the etiquette for these kinds of results? Asking for replacement?

    Disk 1:

    Disk 2:

  • WSSWSS Member

    That error_rate on 2 is strange. I'd back it up, then newfs it and see how it behaves.

  • @WSS said:
    That error_rate on 2 is strange. I'd back it up, then newfs it and see how it behaves.

    It's a new, empty install :(

  • WSSWSS Member

    Check the SATA cable, then try a different port.

    Thanked by 1deadbeef
  • @WSS said:
    Check the SATA cable, then try a different port.

    One sec, teleporting at @virmach 's location... :p

  • WSSWSS Member

    lol you requested SmartOS?

    Thanked by 1deadbeef
  • deadbeefdeadbeef Member
    edited April 2017

    @WSS said:
    lol you requested SmartOS?

    It came with CentOS and IPMI :)

  • WSSWSS Member

    No wonder the drive committed suicide.

    Thanked by 1deadbeef
  • @WSS said:
    No wonder the drive committed suicide.

    HAHAHAHAHAHA :D

  • sinsin Member
    edited April 2017

    The output of your smartctl screenshots look fine. It's common to see numbers on multi and raw. You can run a short and long test on them to see the results of those too.

    Here's one of my drives:

    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       2
      3 Spin_Up_Time            0x0027   174   172   021    Pre-fail  Always       -       2275
      4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       86
      5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002f   200   200   051    Pre-fail  Always       -       0
      9 Power_On_Hours          0x0032   066   066   000    Old_age   Always       -       25070
     10 Spin_Retry_Count        0x0033   100   253   051    Pre-fail  Always       -       0
     11 Calibration_Retry_Count 0x0033   100   253   051    Pre-fail  Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       84
    180 Unknown_HDD_Attribute   0x002f   200   200   100    Pre-fail  Always       -       0
    184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
    187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
    188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       1
    190 Airflow_Temperature_Cel 0x0022   070   064   045    Old_age   Always       -       30
    192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       80
    193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       5
    194 Temperature_Celsius     0x0022   113   107   000    Old_age   Always       -       30
    195 Hardware_ECC_Recovered  0x0036   200   200   000    Old_age   Always       -       0
    196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       5
    
    SMART Error Log Version: 1
    No Errors Logged
    
    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Short offline       Completed without error       00%     24982         -
    # 2  Short offline       Completed without error       00%     24894         -
    # 3  Short offline       Completed without error       00%     24814         -
    # 4  Short offline       Completed without error       00%     24646         -
    # 5  Short offline       Completed without error       00%     24478         -
    # 6  Extended offline    Completed without error       00%     24399         -
    # 7  Short offline       Completed without error       00%     24270         -
    # 8  Extended offline    Completed without error       00%        18         -
    
    Thanked by 1deadbeef
Sign In or Register to comment.